[Elecraft] The ProSet - K2 Boom Headset - Left channel only...
Clay Autery
KY5G at montac.com
Wed Jul 25 10:35:56 EDT 2018
Geez... guys... <big smile>
I didn't ask y'all anything about warranty repairs or any of that....
Not even my headset. He's a 70+ year old man fully capable of making
his OWN decisions.
I posted a technical question!
73,
______________________
Clay Autery, KY5G
(318) 518-1389
On 25-Jul-18 09:11, Walter Underwood wrote:
> A Koss SB45 ($25) is another option for an interim headset. I’ve heard good reports on that one, too.
>
> https://www.amazon.com/Koss-sb45-SB-45-Communication-Stereophones/dp/B00081A2CW
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
>> On Jul 25, 2018, at 4:17 AM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
>>
>> I agree with John on this. Heil is good about warranty and quick turn-a-round. If one is concerned about being without a headset, then I suggest obtaining/buying a CM500 as a spare while the ProSet is away for repair.
>>
>> 73
>>
>> Bob, K4TAX
>>
>>
>> On 7/25/2018 6:06 AM, john at kk9a.com wrote:
>>> I would contact Heil, they should fix it under warranty.
>>>
>>> John KK9A
>>>
>>>
>>>
>>> Clay Autery KY5G wrote:
>>>
>>> Anyone ever had a ProSet two fail to deliver two channel output when
>>> everything is set up correctly (aka bad cable or failed R channel solder
>>> joint at one end or the other)?
>>>
>>> My Elmer has a set bought in April of this year and has never been able
>>> to get right channel. I took it today to try on my K3s with known good
>>> setup for 2-channel into phones (Sennheiser HD598SE).
>>>
>>> Same problem on my radio... no right channel. Almost HAS to be 1)
>>> solder joint failure on one of the wires to the driver, 2) a right
>>> channel (+) solder failure at the 1/8" TRS, 2) failed right driver.
>>> It's a non-coiled three cable-bonded cord... so I am assuming 3
>>> conductors with shields for ground.
>>>
>>> He's ordered a new cable, but I want to make sure it's not something we
>>> have both not considered before replacing the cable. I guess he could
>>> warranty repair, et al. but he doesn't want to be without a functional
>>> headset for weeks.
>>>
>>> 73,
More information about the Elecraft
mailing list