[Elecraft] The ProSet - K2 Boom Headset - Left channel only...

[Bob McGraw K4TAX]

I agree with John on this.  Heil is good about warranty and quick 
turn-a-round.    If one is concerned about being without a headset, then 
I suggest obtaining/buying a CM500 as a spare while the ProSet is away 
for repair.

73

Bob, K4TAX


On 7/25/2018 6:06 AM, john at kk9a.com wrote:
> I would contact Heil, they should fix it under warranty.
>
> John KK9A
>
>
>
> Clay Autery KY5G wrote:
>
> Anyone ever had a ProSet two fail to deliver two channel output when
> everything is set up correctly (aka bad cable or failed R channel solder
> joint at one end or the other)?
>
> My Elmer has a set bought in April of this year and has never been able
> to get right channel.  I took it today to try on my K3s with known good
> setup for 2-channel into phones (Sennheiser HD598SE).
>
> Same problem on my radio...  no right channel.  Almost HAS to be 1)
> solder joint failure on one of the wires to the driver, 2) a right
> channel (+) solder failure at the 1/8" TRS, 2) failed right driver.
> It's a non-coiled three cable-bonded cord...  so I am assuming 3
> conductors with shields for ground.
>
> He's ordered a new cable, but I want to make sure it's not something we
> have both not considered before replacing the cable.  I guess he could
> warranty repair, et al. but he doesn't want to be without a functional
> headset for weeks.
>
> 73,
>