[Elecraft] Which Amp ?

[Rick Reynolds]

I appreciate all of the input on the amps. Lots of good info and more info
to think about. All of those mentioned are good products and since I have
elecraft products now that adds to my decision. Again, thanks to everyone
and I would like to close this thread. Lots of sub topics that people can
open under those topics.

73's Rick NJ5W

On Tuesday, July 24, 2018, Jim Brown <jim at audiosystemsgroup.com> wrote:

> On 7/24/2018 12:43 PM, Paul Baldock wrote:
>
>> The SPE manuals are specific in saying use ALC to control the power.
>>
>
> In general, doing that is a recipe for high IMD, which means splatter and
> clicks.
>
> ALC is fine as "belt and suspenders" protection for the amplifier's output
> stage. There are also issues with poorly designed rigs that produce
> overshoots at the beginning of TX when run below max output. W8JI has good
> info about this on his website. AFAIK, Elecraft rigs do not have a serious
> problem with this, although I do see a few dB when changing power on my K3.
>
> 73, Jim K9YC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rreynolds51 at gmail.com
>