[Elecraft] KPA1500 latest firmware

[Paul Baldock]

Mines #244 about a month old. I have used it a lot on 6M but very 
little on 10M with no obvious problem.

- Paul  KW7Y

At 09:17 AM 7/20/2018, Roy Koeppe wrote:

>They must have made an "improvement" on some models since yours!
>
>Roy      K6XK       Iowa
>
>
>I am apparently fortunate.  My KPA1500 is #29 and does not have that issue
>
>at full power out on 10 or 6.
>
>Ed.. AB4IQ
>Hi Paul,
>
>When attempting to transmit or 10 or 6 meters, the left half of the display
>instantly blanks out and remains that way till you reboot the amp power
>switch. Has been reported by several with early serial numbers like my #160.
>
>Roy     K6XK
>
>
>-----
>Could you describe this problem. I have not seen it.
>
>- Paul  KW7Y
>
>At 05:27 AM 7/20/2018, Roy Koeppe wrote:
>>Now am waiting for the promised ATU upgrade kit to fix the main display
>>cut out problem which occurs on 10
>
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to paul at paulbaldock.com