[Elecraft] K2 external speaker hole

[Don Wilhelm]

Mark,

The jack *should* fit through the hole, but I also know that it does not 
with the jack supplied.
So ream out the hole in the top cover.  I use a thin bladed knife, but a 
drill bit or a proper reamer will work.
You only have to take a little metal from the inside of the hole.

73,
Don W3FPR

On 7/19/2018 11:00 AM, Mark Petrovic wrote:
> In the top cover for my K2 S/N/ 7809, the external speaker hole is way too
> small for the jack to pass through.  Is it the design intent of the K2 that
> this jack be screwed in?  Or should it pass through without forcing it?  Or
> does it matter?