[Elecraft] KPA500 thermal clicks

[Bob McGraw K4TAX]

Well I really don't have an issue with mine but I did search and learn 
about using a Sorbothane damper.   Interesting stuff and related 
applications.

73

Bob, K4TAX


On 7/19/2018 9:01 AM, Clay Autery wrote:
> Y'all are making me want to find a unit with this "issue" now just so 
> I can solve the mystery....
>
> IF it is the aluminum fins "creaking" due to rapid thermal 
> expansion/contraction, one possible/probably solution is a small 
> Sorbothane damper attached across the fins in an appropriate spot....  
> Can likely be don without measurably challenging the airflow...
>
> 73,
>
> ______________________
> Clay Autery, KY5G
> (318) 518-1389
>
> On 19-Jul-18 08:18, hawley, charles j jr wrote:
>> The ticking sound is clearly the resonant aluminum heat sink fins. 
>> The mechanical shrinking or expanding is abrupt and resonates the 
>> fins much like a tuning fork.
>> My take on it...
>>
>> Chuck
>> Amateur Radio, KE9UW
>> _____
>> From: elecraft-bounces at mailman.qth.net 
>> [elecraft-bounces at mailman.qth.net] on behalf of Martin Sole 
>> [hs0zed at gmail.com]
>> Sent: Wednesday, July 18, 2018 8:37 PM
>> To: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] KPA500 thermal clicks
>>
>> I think it sounds "orrible!". I'm quite used to the low rumble of the
>> blower in my Alpha 77D but that ticking would be like Chinese water
>> torture to me. Listening to an individual tick it does seem to have a
>> ring to it. Okay the recording was perhaps not the most acoustically
>> perfect but it certainly does sound as if the ring is from the source
>> and not any sort of artifact. If it is from the source then I think you
>> can probably find a way to damp it. First trick will be to identify the
>> specific source.
>>
>> I had read other comments about a ticking, always imagined it to be
>> minimal and essentially unobtrusive but if what you have recorded is
>> anything like how it sounds sat in front of it then definitely it does
>> sound pretty bad to me and not just in amplitude but also in its timbre,
>> pitch, and repetition rate.
>>
>> Martin, HS0ZED
>>
>>
>> On 19/07/2018 06:25, ANDY DURBIN wrote:
>>> I placed my Android phone on top of my KPA500 and made a recording 
>>> while making a few cycles of FT8 TX/RX.  The audio files can be 
>>> found here:
>>>
>>> https://www.dropbox.com/sh/amfy3dz8pgl083n/AAAKi2GYripXyIDjiLpJ2hDwa?dl=0 
>>>
>>>
>>>
>>> One file is the raw recording.  The second has been processed in 
>>> Audacity to amplify to 0 dB peak.  The file starts before the first 
>>> TX. Next the hum of the transformer can be heard with FT8 modulation 
>>> in the background from TX moni.   As the recording progresses the 
>>> changes in fan speed can be heard. The click are always well above 
>>> the fan noise.
>>>
>>> I used this recording to perform some spectral analysis of the 
>>> clicks.  I took one sample at the click and another sample of the 
>>> noise just before the click.  I then subtracted the noise from the 
>>> click and I think I have a reasonable click signature to use as a 
>>> baseline for evaluating any mechanical changes I make in an attempt 
>>> to reduce the clicks.
>>>
>>> Crank it up and enjoy, especially if you think it's normal.
>>>
>>> 73,
>>> Andy k3wyc
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to hs0zed at gmail.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to c-hawley at illinois.edu
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ky5g at montac.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net