[Elecraft] K2 DSP Real Time Clock

[Don Wilhelm]

Bob,

The display of "E"s will be shown after the battery has been changed.
Have you tried holding the STORE and RCL buttons together?  If so, what 
is displayed after they are released?   See page 33 in the KDSP2 manual.

If you still get all "E"s after holding those buttons, I don't have a 
good answer (I have never encountered that).  I would suggest emailing 
support at elecraft.com.  Perhaps Gary will have an answer.

73,
Don W3FPR

On 7/17/2018 4:16 PM, Bob DeHaney wrote:
> I cannot get the clock to work.  The RTC is "On", new battery, but the clock
> display shows the battery as discharged. Otherwise the DSP seems to work
> fine.