[Elecraft] SDRPlay connection to K3S
Dave Cole (NK7Z)
dave at nk7z.net
Tue Jul 17 10:31:14 EDT 2018
Joe,
Got a recommendation for one commercially?
73s and thanks,
Dave
NK7Z
https://www.nk7z.net
On 07/17/2018 07:16 AM, Joe Subich, W4TV wrote:
>
> You will need a (hybrid) splitter ... connect the common port of
> the splitter to the RX ANT Out jack, connect one output of the
> splitter to RX ANT IN and connect the other output of the splitter
> to the SDRPlay antenna jack.
>
> A splitter is necessary to keep one receiver from loading the
> other resulting in loss of sensitivity. The receivers (K3, SDRPlay)
> do not have identical input impedance across their range and one
> receiver or the other can become (relatively) deaf on certain
> frequencies depending on the characteristics of the input circuits.
>
> There are those who will say use a BNC T ... that may or may not
> be satisfactory depending on cable lengths and receiver input
> characteristics. Unlike a hybrid splitter, the BNC T connector has
> no isolation between output ports which allows spurious signals
> generated in one receiver to be coupled directly into the other.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2018-07-17 9:16 AM, Steve Muenich wrote:
>> Hello gang,
>>
>> Is there a proper port on the K3S to connect a SDRPlay that would
>> allow for sharing the main antenna while receiving, then be
>> disconnected and isolated when the K3S go into transmit?
>>
>> Thanks
>> Steve, NA5C
>> K3S 10121
>>
>>
>> Sent from my mobile device
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to lists at subich.com
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
More information about the Elecraft
mailing list