[Elecraft] 12v for KAT500, et al.

[Bob McGraw K4TAX]

Yes, for low power devices, meter lamps in tuners and power meters, 
etc.,  I use a power distribution strip I made specifically for that 
purpose.  It is supplied from the stations main supply.  No wall warts 
at my QTH.

The output connectors are a few chassis mount RCA connectors, a couple 
of PowerPole connectors and a 4 position terminal strip. Of note, none 
of my radios are connected to this strip.  All radios connect direct to 
the power supply as does this power distribution strip.

73

Bob, K4TAX


On 7/11/2018 6:52 PM, Dennis Haarsager wrote:
> My new KAT500 adds yet another 12v pigtail to many others in my shack. Does anyone make a box of some sort to collect and organize all these to a 12v supply? Thanks.
>
> Dennis, N7DH/1, MM/N7DH
>
> Sent from my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>