[Elecraft] K3s Output on 6M

[Gary Smith]

Thanks Fred,

Guess I have some issues with my K3s then. 
I think it's past warranty at this point. 
I'll break out the K3 and try to get it 
working in place of the K3s, send the K3s 
back for repair and figure how to get WSJT 
going with the K3 while 6 is still open.

73,

Gary
KA1J

> My K3S shows 100 watts, my Bird 43 with a 100 watt element shows 105
> watts, my Daiwa CN-801HP shows 105 watts.   All measurements are made
> into a known 50 ohm dummy load.
> 
> 73
> 
> Bob, K4TAX
> 
> 
> On 7/10/2018 7:03 PM, Gary Smith wrote:
> > What is the expected output on 6 meters?
> >
> > The K3 shows 110W
> > The P3 watt meter says 73.1W
> > The LP-100A says 60.1W
> >
> > When I use the internal tuner it never
> > breaks into the higher power range, it
> > only outputs at 7 watts tops.
> >
> > On all the lower bands it puts out 100
> > reliably.
> >
> > Thanks & 73,
> >
> > Gary
> > KA1J
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to rmcgraw at blomand.net
> >
> 
> 
>