[Elecraft] Breakers for KPA1500?

[john at kk9a.com]

I concur, I used Romex which had 2 conductors plus a ground. Perhaps he
meant that the ground wire should be the same size as the two conductors
but I am not sure how much control you have over this using standard
cable. While adding this circuit I also ran a dedicated 120v outlet for
the radio and rotators.

John  KK9A

N2TK, Tony wrote:

I do not understand the need for three wires plus ground. For a clothes
dryer outlet a neutral is required to get 110VAC from one of the phases to
the neutral. But for amps you only need both phases and a ground. The
plugs are three wire, not four.
73,
N2TK, Tony

On 7/9/2018 12:26 PM, Bob McGraw K4TAX wrote:
> I would also suggest using three -  #10 with ground as the line from
> the breakers to the amp operating position.