[Elecraft] KPA500 installation on side?
Jeff Blaine
KeepWalking188 at ac0c.com
Sun Jul 8 23:25:08 EDT 2018
To clarify - by "side" i mean the side that you would call the left or
right side of the case - that is what i'm considering to have down. Not
the face or back. Just rotating the amp 90 deg.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 08-Jul-18 6:22 PM, Dauer, Edward wrote:
> Oops. My error. I read KPA1500, not 500. Wishful thinking on my part.
>
> Move to strike prior testimony.
>
> Ted , KN1CBR
>
>
>
> On 7/8/18, 5:16 PM, "Dauer, Edward" <edauer at law.du.edu> wrote:
>
> Just last week I sent the same question to Elecraft Support. The answer I got was yes, it can be, with two caveats. First, be sure to leave the 4 inches of free air clearance next to the top (top as in standard orientation), and don't set it so that the LEDs are on the floor. The orientation isn't odd, really. If it is resting on its right side the power switch will be on the rear, but very near the top edge. That's how mine will be, when it arrives this week --- I hope..
>
> Ted, KN1CBR
>
> ------------------------------
>
> Message: 9
> Date: Sun, 8 Jul 2018 10:56:03 -0700
> From: Mark Goldberg <marklgoldberg at gmail.com>
> To: Elecraft Mailing List <elecraft at mailman.qth.net>
> Subject: [Elecraft] KPA500 installation on side?
> Message-ID:
> <CAKn+a3tL_r6RnRod1BSk-ET=_+R1i=SRGJCL-61e7Bw8RvAdTQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Can the KPA500 be installed on it's side? There are feet there. I want to
> install it in an RV and there is more room for wiring and fan air movement
> that way.
>
> A search did not turn up any answers.
>
> 73,
>
> Mark
> W7MLG
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to keepwalking188 at ac0c.com
More information about the Elecraft
mailing list