[Elecraft] help wiring a mic?

[Nr4c]

Has anyone here provided any information on how to wire XXX mic to a KX3?

We’ve all read various dissertations on how the mic is good/bad or just wrong for the use. 

I bought a similar mic from eBay and bought a cable from Radio Shack and a Behringer Phantom Power supply(cost more than the mic!). Had a Heil cable to use from Behringer unit to K3. Worked pretty well. Now use a PR77d on the K3S (I know, overkill but I like the look of it). 



Sent from my iPhone
...nr4c. bill


> On Jul 7, 2018, at 11:31 AM, Walter Underwood <wunder at wunderwood.org> wrote:
> 
> 
>> On Jul 7, 2018, at 4:42 AM, Michael Walker <va3mw at portcredit.net> wrote:
>> 
>> BTW, the KOSS SB40's are really bad.  All bottom end and little
>> highs.  Maybe the 2 I have are defective.
> 
> The Koss SB40 has a dynamic mic. I’m not surprised that a $30 headset with a dynamic mic has problems. It looks like a clone of the Yamaha CM500, but with a worse mic. My Yamaha CM500 says “KOSS” on the mic plug.
> 
> The Koss SB45 has an electret mic and gets good reviews. It is $25.
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com