[Elecraft] K3S & PC Win10 Soundcard

[Joe Subich, W4TV]

73,

    ... Joe, W4TV


On 2018-07-07 11:12 AM, MaverickNH wrote:
> Hi Joe,
> 
> So my PC looks like this:
> 
> SOUND CONTROL PANEL
>    Playback
>      Headphones (High Def AUdio Dev) - this is the new device that appears
> when I plug the BT TXr into the PC Headphones jack
>      Default device (Green check mark)
>    Recording
>      Microphone (Logitech USB Headset)
>      Default Device (green check mark)
> 
> This seems to be what your 1) below suggests

Correct ...

> 
> WSJT-X File:Settings:Audio
> Input Microphone (USB Audio CODEC)
> Output (USB AUdio CODEC)
> 
> This seems to be what your 2) below suggests
> 
> As such, my rig does not TX.

Then you have a configuration error in the K3S or K3 with KIO3B.
Are you using DATA/DATA A?  Is CONFIG:MIC SEL = Line In?  Have
you set the mic gain for 4 bars of ALC *AFTER SELECTING DATA A*
and *AFTER SELECTING MIC SEL= Line In*?

Make sure you have selected a TX tone between 1500 and 2000 Hz and
have the PWR slider at the maximum in WSJT-X.

> Sorry, but I'm not sure what your 3) below suggests ... there is no Sound
> Card tab under Settings, just under the Audio tab, where there is no (0)
> Windows Default Sound Card option under Input or Output. What am I missing?

JT-ALERT most Certainly has a "Sound Card" selection - it is the third
item from the bottom in Settings -> Manage Settings


73,

     ... Joe, W4TV