[Elecraft] help wiring a mic?

[N3eta at coastside.net]

   Kind of make you wonder. Just how many questions don’t get asked. I know I’ve been on this reflector for a while now and have yet to dare ask anyone anything.
If you use the wrong punctuation or mis-spell something! You could get lynched or tarred and feathered and run out of town. 
   We won’t even broach the subject of differing opinions. 
     Ron Genovesi
           N3ETA
Sent from my iPhone

> On Jul 6, 2018, at 8:00 AM, Walter Underwood <wunder at wunderwood.org> wrote:
> 
> I looked up the mic on Amazon, and it is a $20 studio look-alike. I’m sure it has a twenty-five cent electret element under all that stuff, but cheap electret mics are very good.
> 
> So it probably is a decent mic and it isn’t too expensive. If you like the look of it and can power it, why not? The detailed info on Amazon says it works with 5 V bias. One reviewer says the response rolls off under 150 Hz, which would be good for communications use.
> 
> https://www.amazon.com/Neewer-Professional-Broadcasting-Recording-Microphone/dp/B00XBQ8UGG/
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> 
>> On Jul 6, 2018, at 5:16 AM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
>> 
>> Operator mike technique is very important with regard to good to great audio. 
>> 
>> I've found that my $20 Behringer 8500 sounds as good as my $100  Shure SM 58.  Likewise my $200 Heil PR 781 needs for one to pay special attention to mike-to-mouth distance in order to control proximity effect. 
>> 
>> Price and type do not assure one of "great audio".  OTOH - I find most hand mikes supplied with radios sound "plastic" with various resonances and rattles and squeaks, noticeable on the air. 
>> 
>> Bob, K4TAX
>> 
>> 
>> Sent from my iPhone
>> 
>> On Jul 6, 2018, at 6:48 AM, Charlie T <pincon at erols.com> wrote:
>> 
>>>> This mic is intended for studio and recording work. It is a very poor 
>>>> choice for ham radio.
>>>> 
>>>> 73, Jim K9YC
>>> 
>>> 
>>> I feel Jim's choice of the term "poor" is correct, but in a monetary sense.
>>> 
>>> Yes, you may be able to get the mike to communications quality with racks of
>>> audio processing equipment etc.,
>>> but you will probably spend more for all that when you add the cost of the
>>> mike, than radio costs by itself.
>>> 
>>> Seem a tad wasteful to me when the radio already has a good EQ and a mike
>>> costing a fraction of the fancy "studio" mike will sound the same on the
>>> other end of the QSO.
>>> 
>>> I don't under the fascination (or logic?) of using a wide response and
>>> expensive microphone just to narrow it down to 300 to 2800 Hz, unless you're
>>> H3LL bent on putting out a 10 kHz wide VOA grade signal that is frankly,
>>> illegal anyway.
>>> 
>>> Yeah, yeah I know,  you're voice is "different" and you need all that stuff
>>> to make it sound "right".
>>> If that's what you want, then by all means go for it.
>>> It's the same logic as using your (insert $200k car) to make daily commuter
>>> runs mostly stuck in traffic.
>>> 
>>> 73, Charlie k3ICH
>>> 
>>> 
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to rmcgraw at blomand.net
>>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wunder at wunderwood.org
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n3eta at coastside.net