[Elecraft] Expert 1.3 to KX3

[ROCCON GRAZIANO GIULIANO]

Hello,

you just need the (E980232) ACC2 IO Cable Module and a RCA-RCA 
(Male-Male) cable to send the PTT to the Expert.
The (E980232) ACC2 IO Cable Module is part of the Cable kit pack for the 
KX3 that i always suggest to buy.

ALC is useless, the maximum power out of the KX3 is not a problem for 
the Expert.
With 5 watt you always get more the 1 Kw out.

Is up to you if you need CAT assistance or not, but the Expert have an 
internal frequency counter that can read the radio frequency and set the 
correct BAND-ANTENNA for you (based on the expert settings you did before).
Just give a short shot on the CW Key and the Expert will change the 
band, if for a reason or another, was not automaticcally changed.

Hope to help...

73's de Graziano IW2NOY



Il 05/07/2018 09:49, 2EØLDZ ha scritto:
> Has anyone made up a cable to link the KX3 to the Expert 1.3.
>
> I am about to get Dan to make up one for me and was interested of anyone's experience of running the expert with the KX3.  Also to see how the cable works from which pins to which?
>
> MØTDZ
>
> Trevor Clapp
> M6LDZ
> 2E0LDZ
> LDZ at chopcat.co.uk <mailto:LDZ at chopcat.co.uk>
>
> RADIO BLOG <http://chopcat.co.uk/page1/blog/index.html>
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to graziano at roccon.com