[Elecraft] Elecraft Digest, Vol 171, Issue 11
Sidney Frissell
sidfrissell at gmail.com
Wed Jul 4 20:03:31 EDT 2018
I’ve been licensed since 1951 also and I think you old narrow-minded rag-chewers should stay away from FT8 frequencies. You are obviously too old to learn how FT8 really works! Meanwhile I’ll keep racking up new dx contacts there.
Sent from my iPhone
> On Jul 4, 2018, at 2:05 PM, elecraft-request at mailman.qth.net wrote:
>
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. k3 and power sdr software (buddy s)
> 2. Low Voltage Band Data Output (William Liporace)
> 3. Re: K-Line Climate Control (Bill)
> 4. Re: K-Line Climate Control (Dave Sublette)
> 5. Re: K-Line Climate Control (Ken G Kopp)
> 6. Re: K-Line Climate Control (Doug Person)
> 7. Re: K-Line Climate Control (Phil Hystad)
> 8. Re: K-Line Climate Control (Scott Manthe)
> 9. K3S VS: IC-7300 (Doug Person)
> 10. Re: K-Line Climate Control (Lee Ormiston)
> 11. Re: K3S VS: IC-7300 (Doug Turnbull)
> 12. Re: Low Voltage Band Data Output (Jim Miller)
> 13. Re: K-Line Climate Control (K2bew)
> 14. Re: K3S VS: IC-7300 (Tom)
> 15. K3S VS: IC-7300 (Bob McGraw K4TAX)
> 16. Re: K3S VS: IC-7300 (Clay Autery)
> 17. Re: [KX3] FT8 Here's My Comparison of FT8 and Regular Modes
> (erusst at att.net)
> 18. Re: [KX3] FT8 Here's My Comparison of FT8 and Regular Modes
> (Barry)
> 19. Re: FT8: "Magic radio"? (Wes Stewart)
> 20. Re: [KX3] FT8 Here's My Comparison of FT8 and Regular Modes
> (Ken G Kopp)
> 21. Re: K3S VS: IC-7300 (Bill)
> 22. Re: [KX3] FT8 Here's My Comparison of FT8 and Regular Modes
> (Jim Brown)
> 23. Re: Low Voltage Band Data Output (William Liporace)
> 24. Re: K3S VS: IC-7300 (Doug Person)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 4 Jul 2018 10:55:17 -0500
> From: buddy s <buddys70 at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] k3 and power sdr software
> Message-ID:
> <CAHaC9R9Xq4uM8DvXdWR8=wSOwW-+aTSGwYxDmUETYO7G811C4w at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> does anybody want to share their first hand knowledge of using power sdr
> software with their k3 or k3s?
>
> thanks
>
>
> buddy, w3bs
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 4 Jul 2018 11:55:43 -0400
> From: William Liporace <wc2l at wc2l.com>
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] Low Voltage Band Data Output
> Message-ID: <9e68eae1-5219-f746-9973-1722f9b8ac65 at wc2l.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Hi Folks,
> I thought it was me, but I guess not... When I hook up a cable to the
> ACC plug for band data output, I get about 4.8v (slightly less than 5v).
> When I hook up the radio to any antenna switch that has band data input,
> the voltage goes down to 3v. This is not enough to drive the antenna
> switches.? This is a new KIO3B board, so is it a bad board? Is there
> something else not set right that I am missing?? I didn't anything in
> the manuals..
>
> TNX Will WC2L
>
> --
> William Liporace WC2L
> http://www.wc2l.com or http://dxc.wc2l.com
> AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz
> wc2l at wc2l.com
>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 4 Jul 2018 12:04:45 -0400
> From: Bill <billclarke at nycap.rr.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID: <87086642-8569-b6e0-3ecd-db83e35c1b7e at nycap.rr.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Poor little radio - out there all alone, hot in the summer and freezing
> in the winter. Alone and forgotten - waiting in the lonely darkness.
> But, you expect it to do your bidding at the drop of a hat. How would
> you feel if you did all your yard work in the blazing sun - then went
> back to your hot damp shed?
>
> Yeah yeah - the devil made me say it!
>
> Bill W2BLC K-Line
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 4 Jul 2018 12:09:36 -0400
> From: Dave Sublette <k4to.dave at gmail.com>
> To: alaparos at w2cs.net
> Cc: Elecraft Discussion List <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID:
> <CAKynJKksoxsyN1NicgvzkSTeo+jwxcqXDOgoTBH34A22c5TEzA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Is this some sort of a spoof? You can't be serious. Putting beautiful
> equipment like this into the weather(not quite, but almost) is poor
> engineering practice at least and at most, a felony. If you insist on
> doing this, sell your Elecraft stuff and buy one of the other three
> imported brands, but don't expect to get any repair service when it breaks
> from environmental abuse.
>
> End of soapbox rant, for now.
>
> Dave, K4TO
>
>> On Wed, Jul 4, 2018 at 11:42 AM alaparos at w2cs.net <alaparos at w2cs.net> wrote:
>>
>> I?m at the point now in my household move where I should like to put my
>> K-Line (K3/KPA1500) out in a shed about 200? from the house and operate it
>> remotely via an local ethernet connection. This week I?ve been sweltering
>> in the humid heat here in the NE and that prompts the question: What makes
>> since in the way of keep the equipment happy across wide temperature and
>> humidity changes? Winters possibly down below freezing, but dry, and
>> summers up to 100F and humid. Today?s temp is clearing 88 with a dew point
>> of 76, for example.
>>
>> What do you all do, short of supplying heaters and/or air conditioners?
>> If I could avoid that, I would like to. The good news is that
>> environmental changes are gradual. The spec page for the KPA1500 does not
>> seem to mention environmental specs.
>>
>> Thanks for any info.
>>
>> Gary W2CS
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k4to at arrl.net
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 4 Jul 2018 10:22:15 -0600
> From: Ken G Kopp <kengkopp at gmail.com>
> To: Elecraft <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID:
> <CAD4CdTOCX68OwTig7bh0DvXGjhUtrB0rD9QTzp9wMecW5uHCEA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> A strange ... and "nutty"... concept. More appropriate for April 1st IMO.
>
> K0PP
>
>> On Wed, Jul 4, 2018, 10:10 Dave Sublette <k4to.dave at gmail.com> wrote:
>>
>> Is this some sort of a spoof? You can't be serious. Putting beautiful
>> equipment like this into the weather(not quite, but almost) is poor
>> engineering practice at least and at most, a felony. If you insist on
>> doing this, sell your Elecraft stuff and buy one of the other three
>> imported brands, but don't expect to get any repair service when it breaks
>> from environmental abuse.
>>
>> End of soapbox rant, for now.
>>
>> Dave, K4TO
>>
>> On Wed, Jul 4, 2018 at 11:42 AM alaparos at w2cs.net <alaparos at w2cs.net>
>> wrote:
>>
>>> I?m at the point now in my household move where I should like to put my
>>> K-Line (K3/KPA1500) out in a shed about 200? from the house and operate
>> it
>>> remotely via an local ethernet connection. This week I?ve been
>> sweltering
>>> in the humid heat here in the NE and that prompts the question: What
>> makes
>>> since in the way of keep the equipment happy across wide temperature and
>>> humidity changes? Winters possibly down below freezing, but dry, and
>>> summers up to 100F and humid. Today?s temp is clearing 88 with a dew
>> point
>>> of 76, for example.
>>>
>>> What do you all do, short of supplying heaters and/or air conditioners?
>>> If I could avoid that, I would like to. The good news is that
>>> environmental changes are gradual. The spec page for the KPA1500 does
>> not
>>> seem to mention environmental specs.
>>>
>>> Thanks for any info.
>>>
>>> Gary W2CS
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k4to at arrl.net
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kengkopp at gmail.com
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 4 Jul 2018 10:55:30 -0600
> From: Doug Person <doug at kj0f.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID: <3b064ef0-1b0d-3e40-f307-f64d320843f3 at kj0f.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Operating a K3 remotely is one thing. Subjecting it to varying
> temperatures and humidity is something else. Obviously, high temps and
> humidity will be a problem for any radio. You need reasonable climate
> control no matter what.
>
> The reason I'm responding to this is because eventually the only way I
> will be able to operate is to place a transceiver in a shed on a
> friend's property and use a multiband antenna -all of which will be
> operated over the internet. The ambient RF noise in my townhome makes
> any HF operating impossible.
>
> A 5000 BTU air conditioner can be obtained from many retailers for very
> little money. This would solve humidity and high temperature issues.
> Unless the low temperatures are extreme, I don't think its much of an issue.
>
>
> Doug -- KJ0F
>
>
>> On 7/4/2018 10:22 AM, Ken G Kopp wrote:
>> A strange ... and "nutty"... concept. More appropriate for April 1st IMO.
>>
>> K0PP
>>
>>> On Wed, Jul 4, 2018, 10:10 Dave Sublette <k4to.dave at gmail.com> wrote:
>>>
>>> Is this some sort of a spoof? You can't be serious. Putting beautiful
>>> equipment like this into the weather(not quite, but almost) is poor
>>> engineering practice at least and at most, a felony. If you insist on
>>> doing this, sell your Elecraft stuff and buy one of the other three
>>> imported brands, but don't expect to get any repair service when it breaks
>>> from environmental abuse.
>>>
>>> End of soapbox rant, for now.
>>>
>>> Dave, K4TO
>>>
>>> On Wed, Jul 4, 2018 at 11:42 AM alaparos at w2cs.net <alaparos at w2cs.net>
>>> wrote:
>>>
>>>> I?m at the point now in my household move where I should like to put my
>>>> K-Line (K3/KPA1500) out in a shed about 200? from the house and operate
>>> it
>>>> remotely via an local ethernet connection. This week I?ve been
>>> sweltering
>>>> in the humid heat here in the NE and that prompts the question: What
>>> makes
>>>> since in the way of keep the equipment happy across wide temperature and
>>>> humidity changes? Winters possibly down below freezing, but dry, and
>>>> summers up to 100F and humid. Today?s temp is clearing 88 with a dew
>>> point
>>>> of 76, for example.
>>>>
>>>> What do you all do, short of supplying heaters and/or air conditioners?
>>>> If I could avoid that, I would like to. The good news is that
>>>> environmental changes are gradual. The spec page for the KPA1500 does
>>> not
>>>> seem to mention environmental specs.
>>>>
>>>> Thanks for any info.
>>>>
>>>> Gary W2CS
>>>>
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to k4to at arrl.net
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to kengkopp at gmail.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to doug at kj0f.com
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 04 Jul 2018 10:03:24 -0700
> From: Phil Hystad <phystad at mac.com>
> To: alaparos at w2cs.net
> Cc: elecraft <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID: <F47CEFC7-5D70-4887-856D-235BD8BFC023 at mac.com>
> Content-Type: text/plain; charset=utf-8
>
> Surprised to see the term "Climate Control". Sorry to be fussy and pendantic but this is not a climate control question. Climate is the long term, local & world-wide, changing of weather parameters/variables. More correctly this would be environmental control of the operation of your rig considering weather changes and even extremes of weather.
>
> 73, pendantic phil, K7PEH
>
>
>> On Jul 4, 2018, at 8:42 AM, alaparos at w2cs.net wrote:
>>
>> I?m at the point now in my household move where I should like to put my K-Line (K3/KPA1500) out in a shed about 200? from the house and operate it remotely via an local ethernet connection. This week I?ve been sweltering in the humid heat here in the NE and that prompts the question: What makes since in the way of keep the equipment happy across wide temperature and humidity changes? Winters possibly down below freezing, but dry, and summers up to 100F and humid. Today?s temp is clearing 88 with a dew point of 76, for example.
>>
>> What do you all do, short of supplying heaters and/or air conditioners? If I could avoid that, I would like to. The good news is that environmental changes are gradual. The spec page for the KPA1500 does not seem to mention environmental specs.
>>
>> Thanks for any info.
>>
>> Gary W2CS
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to phystad at mac.com
>
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 4 Jul 2018 13:06:13 -0400
> From: Scott Manthe <scott.manthe at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID: <a34f0c2c-f8a6-fbe0-392c-f911f0bcc489 at gmail.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I'd bet that doing this will shorten the lives of both the K3 and the
> KPA1500, maybe significantly.
>
> 73,
> Scott N9AA
>
>> On 7/4/18 11:42 AM, alaparos at w2cs.net wrote:
>> I?m at the point now in my household move where I should like to put my K-Line (K3/KPA1500) out in a shed about 200? from the house and operate it remotely via an local ethernet connection. This week I?ve been sweltering in the humid heat here in the NE and that prompts the question: What makes since in the way of keep the equipment happy across wide temperature and humidity changes? Winters possibly down below freezing, but dry, and summers up to 100F and humid. Today?s temp is clearing 88 with a dew point of 76, for example.
>>
>> What do you all do, short of supplying heaters and/or air conditioners? If I could avoid that, I would like to. The good news is that environmental changes are gradual. The spec page for the KPA1500 does not seem to mention environmental specs.
>>
>> Thanks for any info.
>>
>> Gary W2CS
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to scott.manthe at gmail.com
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Wed, 4 Jul 2018 11:11:11 -0600
> From: Doug Person <doug at kj0f.com>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3S VS: IC-7300
> Message-ID: <903804df-372d-93e4-8594-6dde714e297d at kj0f.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I didn't see any comparison chart for the K3S and the IC-7610.? I did
> see the comparison of the K3S with the IC-7300. This made me laugh. By
> the time you add up the required options for the K3S to achieve feature
> parity with the IC-7300 it costs 3 times as much. This actually makes
> the IC-7300 look like a really good deal. The IC-7300 is, after all, an
> entry level radio.
>
> I'll never stop being impressed by the ability of the K3/K3S. But, to
> me, it is no longer cost competitive. The only advantage the K3S has
> today is it has one of the best receivers. I doubt this advantage will
> last much longer.
>
> Doug -- KJ0F
>
>
>
> ------------------------------
>
> Message: 10
> Date: Wed, 4 Jul 2018 11:25:07 -0600
> From: Lee Ormiston <ldormiston at gmail.com>
> To: Scott Manthe <scott.manthe at gmail.com>
> Cc: Elecraft <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID:
> <CAFuRoiELzfNpxYos-7sBf54dx=tSnV_4CObTt1bTC_78PVY3kw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> What about creating a Faraday Cage (as done in some offices) by covering
> walls, ceilings, floors of apartment with electrically bonded, metal (not
> plastic) window screen. Also, follow bonding/grounding techniques in H.
> Ward Silver's book published by ARRL?
>
> Lee
> N0RRL
>
> On Wed, Jul 4, 2018 at 11:06 AM, Scott Manthe <scott.manthe at gmail.com>
> wrote:
>
>> I'd bet that doing this will shorten the lives of both the K3 and the
>> KPA1500, maybe significantly.
>>
>> 73,
>> Scott N9AA
>>
>>> On 7/4/18 11:42 AM, alaparos at w2cs.net wrote:
>>>
>>> I?m at the point now in my household move where I should like to put my
>>> K-Line (K3/KPA1500) out in a shed about 200? from the house and operate it
>>> remotely via an local ethernet connection. This week I?ve been sweltering
>>> in the humid heat here in the NE and that prompts the question: What makes
>>> since in the way of keep the equipment happy across wide temperature and
>>> humidity changes? Winters possibly down below freezing, but dry, and
>>> summers up to 100F and humid. Today?s temp is clearing 88 with a dew point
>>> of 76, for example.
>>>
>>> What do you all do, short of supplying heaters and/or air conditioners?
>>> If I could avoid that, I would like to. The good news is that
>>> environmental changes are gradual. The spec page for the KPA1500 does not
>>> seem to mention environmental specs.
>>>
>>> Thanks for any info.
>>>
>>> Gary W2CS
>>>
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to scott.manthe at gmail.com
>>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ldormiston at gmail.com
>>
>
>
> ------------------------------
>
> Message: 11
> Date: Wed, 4 Jul 2018 17:40:41 -0000
> From: "Doug Turnbull" <turnbull at net1.ie>
> To: "'Doug Person'" <doug at kj0f.com>, <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3S VS: IC-7300
> Message-ID: <906327BC44C944EEB73712EE7A46E689 at DougTPC>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Friends,
> There are some other points not mentioned. Yes, I agree the K3 is
> pricy but the performance is there. However for most things the IC-7300
> does a grand job as does the TD590s. For now and for some considerable
> time in the past though the K3 has had a superior receiver good in contests
> and with high power neighbours.
>
> Other K3/S advantages:
> 1)Modular construction allows one to only purchase what is relevant to your
> needs and to build the radio up over time if desired. This also
> facilitates repair as modules can be swapped or sent back to California.
> No need to send the entire radio. Elecraft if you make a new radio in the
> future try to maintain this modular approach.
>
> 2) Just what type of support does one get from Icom? I very much doubt
> there is an equal forum with the designers involved. Support from the
> factory in getting questions answered is also excellent.
>
> 3)More attention should be given to the clean output signal of the K3.
>
> 4)I wonder if the facilitation of digimodes by the 7610 is the equal of the
> K3/S.
>
> 5) There is a very full line of accessories for the Elecraft line and again
> all of this is modular.
>
> 6) The ability to at least assemble the radio gives the owner of a kit built
> radio a better understanding as to operation and trouble shooting if ever
> needed. It also saves on import duties into the EU.
>
> Maybe Wayne should toot Elecrafts horn for these advantages as well.
> Again though you can work DX with an old FTDX 100 or Drake 2B with Johnson
> Ranger at much lower cost it will not be so well facilitated. The fully
> equipped K3 is not an inexpensive radio it is a Porsche of the radio world.
>
> I can not imagine a company better than Elecraft to deal with though
> I understand that Flex is pretty good and so to has TenTec been in the past.
> Are they as good - this is hard for me to believe.
>
> 73 Doug EI2CN
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Doug Person
> Sent: 04 July 2018 17:11
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3S VS: IC-7300
>
> I didn't see any comparison chart for the K3S and the IC-7610.? I did
> see the comparison of the K3S with the IC-7300. This made me laugh. By
> the time you add up the required options for the K3S to achieve feature
> parity with the IC-7300 it costs 3 times as much. This actually makes
> the IC-7300 look like a really good deal. The IC-7300 is, after all, an
> entry level radio.
>
> I'll never stop being impressed by the ability of the K3/K3S. But, to
> me, it is no longer cost competitive. The only advantage the K3S has
> today is it has one of the best receivers. I doubt this advantage will
> last much longer.
>
> Doug -- KJ0F
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to turnbull at net1.ie
>
>
>
> ------------------------------
>
> Message: 12
> Date: Wed, 4 Jul 2018 13:45:53 -0400
> From: Jim Miller <jtmiller47 at gmail.com>
> To: William Liporace <wc2l at wc2l.com>
> Cc: Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Low Voltage Band Data Output
> Message-ID: <DD531E59-08C7-4567-81B5-10BC85D8D95A at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> The open collector outputs is
> F the K3 or K3s are lightly pulled up then fed thru a series resistor. Your decode must have adequate buffering in place to avoid drawing excessive current. A cmos buffer chip will do the trick.
>
> 73
>
> Jim ab3cv (got the t shirt)
>
> On Jul 4, 2018, at 11:55 AM, William Liporace <wc2l at wc2l.com> wrote:
>
> Hi Folks,
> I thought it was me, but I guess not... When I hook up a cable to the ACC plug for band data output, I get about 4.8v (slightly less than 5v). When I hook up the radio to any antenna switch that has band data input, the voltage goes down to 3v. This is not enough to drive the antenna switches. This is a new KIO3B board, so is it a bad board? Is there something else not set right that I am missing?? I didn't anything in the manuals..
>
> TNX Will WC2L
>
> --
> William Liporace WC2L
> http://www.wc2l.com or http://dxc.wc2l.com
> AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz
> wc2l at wc2l.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim at jtmiller.com
>
> ------------------------------
>
> Message: 13
> Date: Wed, 4 Jul 2018 13:48:43 -0400
> From: K2bew <tombewick at gmail.com>
> To: alaparos at w2cs.net
> Cc: Elecraft Mail List <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K-Line Climate Control
> Message-ID:
> <CA+sV7KDW8jfi5vJnU5PQDGumaYu01iFbaxRo19OqPuAWW2-i2A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Just buy a few old tube radios off eBay to restore that were stored in
> sheds or garages and look at the all the corrosion from condensation inside
> them and you will have your answer. Not a good idea unless you climate
> control the shed.
> 73, Tom, k2bew
>
>> On Wed, Jul 4, 2018, 11:43 AM alaparos at w2cs.net <alaparos at w2cs.net> wrote:
>>
>> I?m at the point now in my household move where I should like to put my
>> K-Line (K3/KPA1500) out in a shed about 200? from the house and operate it
>> remotely via an local ethernet connection. This week I?ve been sweltering
>> in the humid heat here in the NE and that prompts the question: What makes
>> since in the way of keep the equipment happy across wide temperature and
>> humidity changes? Winters possibly down below freezing, but dry, and
>> summers up to 100F and humid. Today?s temp is clearing 88 with a dew point
>> of 76, for example.
>>
>> What do you all do, short of supplying heaters and/or air conditioners?
>> If I could avoid that, I would like to. The good news is that
>> environmental changes are gradual. The spec page for the KPA1500 does not
>> seem to mention environmental specs.
>>
>> Thanks for any info.
>>
>> Gary W2CS
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to tombewick at gmail.com
>
>
> ------------------------------
>
> Message: 14
> Date: Wed, 4 Jul 2018 14:10:01 -0400
> From: "Tom" <tomb18 at videotron.ca>
> To: "Doug Turnbull" <turnbull at net1.ie>, "'Doug Person'"
> <doug at kj0f.com>, <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3S VS: IC-7300
> Message-ID: <FB93182D98314722AD23265A713CCA9C at DESKTOPAV61F2H>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> My experience with technical support from Icom, .. most emails go
> unanswered. Phone calls get resolved. Very little feedback for firmware
> updates or issues.
> My experience with Yaesu, some of the most rude and condescending support
> staff anywhere. Horrible to deal with. Everything is "send in the radio".
> My experience with Elecraft, top notch, always want to help, sometimes slow
> firmware updates, but always proportional to the number of requests.
>
> Ergonomics: Feel of controls, and quality of controls: Yaeus first,
> followed by Icom, then Elecraft. Using a FTDX-5000 is just real pleasure.
>
> 73 Tom
> va2fsq.com
>
> -----Original Message-----
> From: Doug Turnbull
> Sent: Wednesday, July 4, 2018 1:40 PM
> To: 'Doug Person' ; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S VS: IC-7300
>
> Friends,
> There are some other points not mentioned. Yes, I agree the K3 is
> pricy but the performance is there. However for most things the IC-7300
> does a grand job as does the TD590s. For now and for some considerable
> time in the past though the K3 has had a superior receiver good in contests
> and with high power neighbours.
>
> Other K3/S advantages:
> 1)Modular construction allows one to only purchase what is relevant to your
> needs and to build the radio up over time if desired. This also
> facilitates repair as modules can be swapped or sent back to California.
> No need to send the entire radio. Elecraft if you make a new radio in the
> future try to maintain this modular approach.
>
> 2) Just what type of support does one get from Icom? I very much doubt
> there is an equal forum with the designers involved. Support from the
> factory in getting questions answered is also excellent.
>
> 3)More attention should be given to the clean output signal of the K3.
>
> 4)I wonder if the facilitation of digimodes by the 7610 is the equal of the
> K3/S.
>
> 5) There is a very full line of accessories for the Elecraft line and again
> all of this is modular.
>
> 6) The ability to at least assemble the radio gives the owner of a kit built
> radio a better understanding as to operation and trouble shooting if ever
> needed. It also saves on import duties into the EU.
>
> Maybe Wayne should toot Elecrafts horn for these advantages as well.
> Again though you can work DX with an old FTDX 100 or Drake 2B with Johnson
> Ranger at much lower cost it will not be so well facilitated. The fully
> equipped K3 is not an inexpensive radio it is a Porsche of the radio world.
>
> I can not imagine a company better than Elecraft to deal with though
> I understand that Flex is pretty good and so to has TenTec been in the past.
> Are they as good - this is hard for me to believe.
>
> 73 Doug EI2CN
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Doug Person
> Sent: 04 July 2018 17:11
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3S VS: IC-7300
>
> I didn't see any comparison chart for the K3S and the IC-7610. I did
> see the comparison of the K3S with the IC-7300. This made me laugh. By
> the time you add up the required options for the K3S to achieve feature
> parity with the IC-7300 it costs 3 times as much. This actually makes
> the IC-7300 look like a really good deal. The IC-7300 is, after all, an
> entry level radio.
>
> I'll never stop being impressed by the ability of the K3/K3S. But, to
> me, it is no longer cost competitive. The only advantage the K3S has
> today is it has one of the best receivers. I doubt this advantage will
> last much longer.
>
> Doug -- KJ0F
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to turnbull at net1.ie
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tomb18 at videotron.ca
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> ------------------------------
>
> Message: 15
> Date: Wed, 4 Jul 2018 13:15:30 -0500
> From: Bob McGraw K4TAX <rmcgraw at blomand.net>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3S VS: IC-7300
> Message-ID: <3f31cbb5-838b-f5f1-3dda-bb40df5d4127 at blomand.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> From my take and experience comparing the K3S and the IC-7300:
>
> (A)?? Both are ham radios.
>
> (B)
>
> (C)
>
> End of comparison.
>
> 73
> ?Bob, K4TAX
>
>
>
> ------------------------------
>
> Message: 16
> Date: Wed, 4 Jul 2018 13:23:44 -0500
> From: Clay Autery <KY5G at montac.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S VS: IC-7300
> Message-ID: <ddc561d0-9bd6-2476-33c6-5aff8efc2d86 at montac.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I tried a friend's IC-7300 out....? OK for the money, but I would not
> trade my Elecraft for ALL the money I paid for it PLUS a FREE IC-7300.
>
> ______________________
> Clay Autery, KY5G
> (318) 518-1389
>
>> On 04-Jul-18 12:11, Doug Person wrote:
>> I didn't see any comparison chart for the K3S and the IC-7610.? I did
>> see the comparison of the K3S with the IC-7300. This made me laugh. By
>> the time you add up the required options for the K3S to achieve
>> feature parity with the IC-7300 it costs 3 times as much. This
>> actually makes the IC-7300 look like a really good deal. The IC-7300
>> is, after all, an entry level radio.
>>
>> I'll never stop being impressed by the ability of the K3/K3S. But, to
>> me, it is no longer cost competitive. The only advantage the K3S has
>> today is it has one of the best receivers. I doubt this advantage will
>> last much longer.
>>
>> Doug -- KJ0F
>
>
> ------------------------------
>
> Message: 17
> Date: Wed, 4 Jul 2018 18:39:09 +0000 (UTC)
> From: "erusst at att.net" <erusst at att.net>
> To: Wayne Burdick <n6kr at elecraft.com>, Robert Duncan
> <rob.at.theshed at gmail.com>
> Cc: Elecraft Reflector <elecraft at mailman.qth.net>,
> "KX3 at yahoogroups.com" <KX3 at yahoogroups.com>, Doug Millar
> <drzarkof56 at yahoo.com>
> Subject: Re: [Elecraft] [KX3] FT8 Here's My Comparison of FT8 and
> Regular Modes
> Message-ID: <2015196535.2773985.1530729549065 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> A Taylor series is quite appropriate since FT8 was invented by Joe Taylor ;-)
> Russ, N3CO
>
> Sent from Yahoo Mail on Android
>
> On Tue, Jul 3, 2018 at 10:28 PM, Wayne Burdick<n6kr at elecraft.com> wrote: Yeah, sorry. Math joke....
>
> Wayne
>
>
>> On Jul 3, 2018, at 7:21 PM, Robert Duncan <rob.at.theshed at gmail.com> wrote:
>>
>> Just in case there are others like me ....who did not know what a Taylor Series is :
>>
>> In mathematics, a Taylor series is a representation of a function as an infinite sum of terms
>> that are calculated from the values of the function's derivatives at a single point.
>>
>> Source - Wikipedia
>>
>> Cheers
>> Rob
>> VK5ZIK
>>
>> On 4 July 2018 at 11:03, Wayne Burdick n6kr at elecraft.com [KX3] <KX3-noreply at yahoogroups.com> wrote:
>> Doug,
>>
>> I accept your gauntlet and will submit one final OT post despite my business partner?s attempt to shut it down.
>>
>> To wit:
>>
>> Many of us have vanishingly little ?, and from earlier posts it?s clear that K is irrational, so I propose reordering the terms as a Taylor series.
>>
>> Wayne
>> N6KR
>>
>>> On Jul 3, 2018, at 6:27 PM, Doug Millar <drzarkof56 at yahoo.com> wrote:
>>>
>>>
>>> Hi All,
>>>
>>> I was thinking about the differences between using the digital modes on HF and Knob and Dial modes, and I came up with this comparison.
>>>
>>> Basically ft8 and digital modes take more work on the setup end and are easy to operate and "knob and dial" radios have little setup and the most time is spent directing the operation. Both take the same amount of effort but are inverse.
>>> My limited math abilities express then relationship as-
>>>
>>> Dm(S10?+O?)=K
>>>
>>> Kd(S?+O10?)=K
>>>
>>> Where Dm= Digital Mode Kd=Knob and Dial radios S= Setup
>>> O= Operating ?= Time K= Total effort
>>>
>>>
>>> Revisions welcome----- Doug Millar K6JEY
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to erusst at att.net
>
>
> ------------------------------
>
> Message: 18
> Date: Wed, 4 Jul 2018 11:59:52 -0700 (MST)
> From: Barry <w2up at comcast.net>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] [KX3] FT8 Here's My Comparison of FT8 and
> Regular Modes
> Message-ID: <1530730792799-0.post at n2.nabble.com>
> Content-Type: text/plain; charset=us-ascii
>
> First, I haven't read through this entire thread.
>
> I've been a RTTY guy for a long time and am in the #1 spot on the RTTY DXCC
> Honor Roll. That said, I don't get FT8 at all. Turn on your radio and
> computer, come back an hour later and see what you worked - really?
>
> I've been in an antenna limited condo for 9 years now. I'd rather not get
> on the air than make QSOs (if that's still the correct term) with FT8.
>
> Barry W2UP
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
>
>
> ------------------------------
>
> Message: 19
> Date: Wed, 4 Jul 2018 12:07:51 -0700
> From: Wes Stewart <wes_n7ws at triconet.org>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] FT8: "Magic radio"?
> Message-ID: <e85819cd-17f7-8243-606e-b63eed05149d at triconet.org>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I quoted the context.
>
>> On 7/3/2018 6:35 PM, Neil Zampella wrote:
>> Wes,
>>
>> you're taking that out of context.?? The structured messages allow for
>> redundancy if some of the original message is missing. The decoder can take
>> the sync symbols so that the system can understand what type of message it is,
>> it still needs the callsign and signal report.
>>
>> More details can be found here:
>> https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-1.9.1.html#PROTOCOLS
>> and here https://physics.princeton.edu/pulsar/k1jt/FrankeTaylor_QEX_2016.pdf
>> which covers JT65, but which forms some of the basis for the other JT/FT
>> protocols.
>>
>> Neil, KN3ILZ
>>
>>
>>> On 7/3/2018 5:16 PM, Wes Stewart wrote:
>>> In a message to this group back in February I wrote:
>>>
>>> ?? Quoting G4WJS: "For FT8 the net effect is that
>>> ?? up to about 5 seconds of a message may be missing yet still
>>> ?? be decoded. The amount missing can be either a truncation or
>>> ?? parts of the message below the decoding threshold. The FT8
>>> ?? message is structured with sync symbols at the start, middle
>>> ?? and end so missing the start or end may have less impact
>>> ?? than missing other parts since mostly sync symbols may be
>>> ?? lost and they contain no message information."
>>>
>>> Hence, I dubbed the mode, "Imaginary"? since it hears things that aren't there.
>>>
>>> Wes? N7WS
>
>
>
> ------------------------------
>
> Message: 20
> Date: Wed, 4 Jul 2018 13:09:40 -0600
> From: Ken G Kopp <kengkopp at gmail.com>
> To: Barry <w2up at comcast.net>, Elecraft <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] [KX3] FT8 Here's My Comparison of FT8 and
> Regular Modes
> Message-ID:
> <CAD4CdTOaFS6yohNGG6=CCwzfc97p2=S3ZTO2yG7srR7UFoA0Bw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Well-said Barry.
>
> IMO, it's a stretch to call FT8 legitimate.
>
> But then I'm an old poop ... licensed since 1951 ... and CW all the time.
>
> 73!
>
> Ken Kopp - K0PP
>
> 73!
>
>> On Wed, Jul 4, 2018, 13:00 Barry <w2up at comcast.net> wrote:
>>
>> First, I haven't read through this entire thread.
>>
>> I've been a RTTY guy for a long time and am in the #1 spot on the RTTY DXCC
>> Honor Roll. That said, I don't get FT8 at all. Turn on your radio and
>> computer, come back an hour later and see what you worked - really?
>>
>> I've been in an antenna limited condo for 9 years now. I'd rather not get
>> on the air than make QSOs (if that's still the correct term) with FT8.
>>
>> Barry W2UP
>>
>>
>>
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kengkopp at gmail.com
>>
>
>
> ------------------------------
>
> Message: 21
> Date: Wed, 4 Jul 2018 15:13:35 -0400
> From: Bill <billclarke at nycap.rr.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S VS: IC-7300
> Message-ID: <85669824-3ee3-9a31-b1a6-a349ff768cae at nycap.rr.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I asked a similar question awhile back. The fact that I still do not
> have a 7300 may indicate the results of my fact finding.
>
> My reasoning is simple: The K3 is a great radio, certainly part of the
> equation. The Elecraft product support is the other part of the equation.
>
> I have been there and done that with the other manufacturers and I have
> no desire to attempt to work with them again. Life is too short to have
> to deal with rudeness, shoddy workmanship, outright lies, and total lack
> of customer respect. I have experienced same with the big three and Flex.
>
> Happy 4th of July!
>
> Bill W2BLC K-Line
>
>
>
>
> ------------------------------
>
> Message: 22
> Date: Wed, 4 Jul 2018 12:36:35 -0700
> From: Jim Brown <jim at audiosystemsgroup.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] [KX3] FT8 Here's My Comparison of FT8 and
> Regular Modes
> Message-ID:
> <6c41b20b-d9a7-2a3f-cdee-86cfac09635c at audiosystemsgroup.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>> First, I haven't read through this entire thread.
>>
>> I've been a RTTY guy for a long time and am in the #1 spot on the RTTY DXCC
>> Honor Roll. That said, I don't get FT8 at all. Turn on your radio and
>> computer, come back an hour later and see what you worked - really?
>
> NOT really. An exaggeration by those who don't want to use the mode and
> discredit those who do.
>
> What do I know -- I'm one of the younger guys -- only licensed since
> 1955, Extra only since 1959, primarily worked CW all my life except for
> contributing to our club score for contests. I do a lot of RTTY
> contesting, but I have yet to meet anyone who can copy RTTY with their
> two ears.
>
> And radio is FAR more than pushing buttons, yelling in to a mic, or
> doing CW. It also includes maximizing your station and understanding
> propagation, antennas, transmission lines, noise suppression, and
> operating skill. It is totally false that WSJT modes require no
> operating skills. Knowing where to place your signal in the waterfall,
> what to do when QRM causes problems, understanding that you can call a
> station when he's having difficulty with another QSO (the equivalent of
> "tail-ending" with other modes) and so on, are also a factor.
>
> If you don't like a mode (or don't want to learn it) don't use it, but
> don't disparage it by saying things about it that aren't correct.
>
> 73, Jim K9YC
>
>
>
>
> ------------------------------
>
> Message: 23
> Date: Wed, 4 Jul 2018 15:55:29 -0400
> From: William Liporace <wc2l at wc2l.com>
> To: Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Low Voltage Band Data Output
> Message-ID: <f4e1921f-8d13-4256-ef8c-14587d721b61 at wc2l.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I really should have said antenna switch controller. I have two
> controllers.
> A) Is the DX Solutions SAS-6 (Smart Antenna Switch-6)
> B) The KK1L 2x6 Controller.
> Both devices worked flawlessly from the FTdx5000.
>
> Will WC2L
>
>> On 7/4/2018 11:55 AM, William Liporace wrote:
>> Hi Folks,
>> I thought it was me, but I guess not... When I hook up a cable to the
>> ACC plug for band data output, I get about 4.8v (slightly less than
>> 5v). When I hook up the radio to any antenna switch that has band data
>> input, the voltage goes down to 3v. This is not enough to drive the
>> antenna switches.? This is a new KIO3B board, so is it a bad board? Is
>> there something else not set right that I am missing?? I didn't
>> anything in the manuals..
>>
>> TNX Will WC2L
> --
>
> William Liporace WC2L
> http://www.wc2l.com or http://dxc.wc2l.com
> AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz
> wc2l at wc2l.com
>
>
>
> ------------------------------
>
> Message: 24
> Date: Wed, 4 Jul 2018 13:05:06 -0700
> From: Doug Person <doug at kj0f.com>
> To: Doug Turnbull <turnbull at net1.ie>, elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S VS: IC-7300
> Message-ID: <ea53d54e-1f4e-ca2c-e612-23570cb7872b at kj0f.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
>> On 7/4/2018 10:40 AM, Doug Turnbull wrote:
>> Friends,
>> There are some other points not mentioned. Yes, I agree the K3 is
>> pricy but the performance is there. However for most things the IC-7300
>> does a grand job as does the TD590s. For now and for some considerable
>> time in the past though the K3 has had a superior receiver good in contests
>> and with high power neighbours.
> As I said - I agree that the K3 has a superior receiver. It's noticeable
> but not a dramatic difference however.
>> Other K3/S advantages:
>> 1)Modular construction allows one to only purchase what is relevant to your
>> needs and to build the radio up over time if desired. This also
>> facilitates repair as modules can be swapped or sent back to California.
>> No need to send the entire radio. Elecraft if you make a new radio in the
>> future try to maintain this modular approach.
> Modular has its advantages. However, the IC-7300 comes well featured
> already, e.g., 100 watts, spectrum display, built-in tuner ( mine does
> much better than 3:1), effective digital filters, voice recorder for
> receiving and sending.
>> 2) Just what type of support does one get from Icom? I very much doubt
>> there is an equal forum with the designers involved. Support from the
>> factory in getting questions answered is also excellent.
> Perhaps you haven't had an opportunity to need support from Icom - thus
> you are speculating.
>> 3)More attention should be given to the clean output signal of the K3.
>>
>> 4)I wonder if the facilitation of digimodes by the 7610 is the equal of the
>> K3/S.
>>
>> 5) There is a very full line of accessories for the Elecraft line and again
>> all of this is modular.
>>
>> 6) The ability to at least assemble the radio gives the owner of a kit built
>> radio a better understanding as to operation and trouble shooting if ever
>> needed. It also saves on import duties into the EU.
> One can describe the K3s as a kit if they like. The K2 is a real kit.
>> Maybe Wayne should toot Elecrafts horn for these advantages as well.
>> Again though you can work DX with an old FTDX 100 or Drake 2B with Johnson
>> Ranger at much lower cost it will not be so well facilitated. The fully
>> equipped K3 is not an inexpensive radio it is a Porsche of the radio world.
> I have, in fact, done that with those. As well as operated a K3 since it
> was first released. Mine was one of the first 2000 or so. I'm not
> knocking it.
>> I can not imagine a company better than Elecraft to deal with though
>> I understand that Flex is pretty good and so to has TenTec been in the past.
>> Are they as good - this is hard for me to believe.
> Ten-Tec has been (past tense since they pretty much don't exist at the
> moment) great. No argument regarding the involvement of Wayne and Eric
> in this group. Flex engineers are also pretty active and responsive. But
> they are just following Elecraft's lead.
>> 73 Doug EI2CN
>>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Doug Person
>> Sent: 04 July 2018 17:11
>> To: elecraft at mailman.qth.net
>> Subject: [Elecraft] K3S VS: IC-7300
>>
>> I didn't see any comparison chart for the K3S and the IC-7610.? I did
>> see the comparison of the K3S with the IC-7300. This made me laugh. By
>> the time you add up the required options for the K3S to achieve feature
>> parity with the IC-7300 it costs 3 times as much. This actually makes
>> the IC-7300 look like a really good deal. The IC-7300 is, after all, an
>> entry level radio.
>>
>> I'll never stop being impressed by the ability of the K3/K3S. But, to
>> me, it is no longer cost competitive. The only advantage the K3S has
>> today is it has one of the best receivers. I doubt this advantage will
>> last much longer.
>>
>> Doug -- KJ0F
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to turnbull at net1.ie
>>
>>
>
>
>
> ------------------------------
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> End of Elecraft Digest, Vol 171, Issue 11
> *****************************************
More information about the Elecraft
mailing list