[Elecraft] Any advice, please?
Don Wilhelm
donwilh at embarqmail.com
Sun Jul 1 21:24:31 EDT 2018
Wunder,
Thanks for the expaination. I was thinking K3, and you were referring
to the KX3 - yes, I know about the digital/analog ground in the KX3.
73,
Don W3FPR
On 7/1/2018 8:48 PM, Walter Underwood wrote:
> The KX3mic jack provides both mic bias and logic bias. A two-conductor mic plug will short the mic bias to the logic bias. The logic bias is not filtered. I realized that a stereo splitter would separate the logic bias to one channel (where it could be used for PTT) and a mic could be plugged into the other channel with the filtered mic bias.
>
> I wrote the two articles because I got really, really tired of posting the same information over and over again to the this list.
>
> The problem was originally diagnosed on this list by Lyle, KK7P. He suggested turning off mic bias and using only the logic bias. Separating them out works even better. Here is Lyle’s email:
>
> https://groups.yahoo.com/neo/groups/KX3/conversations/topics/9556
>
> The article is pretty short and has pictures.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
>> On Jul 1, 2018, at 4:51 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>
>> wunder,
>>
>> How do you achieve "cleaner mic bias" - the mic bias is either turned on or turned off. The bias voltage comes from the K3.
>>
>> Sorry, but for purposes of this email reflector, I do not wish to read your entire links - often with links like that, there is no content of value. Put the relevant information in the text please.
>>
>> 73,
>> Don W3FPR
>>
>> On 7/1/2018 4:49 PM, Walter Underwood wrote:
>>> Also for voice modes, I’ve compiled some ideas from this list (along with one of my own) for cleaner mic bias and for TX EQ and compression setup.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>
More information about the Elecraft
mailing list