[Elecraft] K2? Easy peasy

[Don Wilhelm]

All,

On the KI6WX mod, the value of R9 should be 1.5k instead of 15k as 
stated. Please excuse my "late night fingers".

Those two resistor changes are only necessary if the KI6WX KSB2 mod is 
added to a K2 with the KPA100 installed.

73,
Don W3FPR

------------------------------------------------------------------------

All,

I do indeed have that mod, but I thought it was mainly for Low Frequency 
rolloff.  I do know that it works quite well for that purpose, but I 
don't know about the 6 dB gain.

Change C34 to 0.47uF, and change C32 to something in the range of 
0.003uF to 0.005uF.

If you want additional gain, I would recommend the KI6WX KSB2 increased 
KSB2 RF Gain mod.  It adds gain without the possibility of overloading 
the Speech Compressor.  If you do that mod, change R9 to 15k and add a 
1k resistor between P1 pin 5 and the base of Q3.

73,
Don W3FPR