[Elecraft] Trouble configuring a K3, MicroHAM Microkeyer

[Joe Subich, W4TV]

The Windows Sound Control Panel and Windows Volume Mixer will
vary depending on the sound card(s) in your system, running
applications and user configuration.   The pictures in the
microKEYER II are illustrative only.

73,

    ... Joe, W4TV


On 1/23/2018 8:31 PM, Eric Rosenberg wrote:
> Joe,
> 
>   
> 
> I've only ever used it with an Orion 565.
> 
>   
> 
> My concern is that the Windows sound "panels (volume mixer, playback
> devices, recording devices) " do not show what the MK12 manual does in re:
> devices, applications and the like.
> 
>   
> 
> 73,
> 
> Eric W3DQ
> 
>   
> 
> Message: 7
> 
> Date: Tue, 23 Jan 2018 09:42:27 -0500
> 
> From: "Joe Subich, W4TV" <lists at subich.com>
> 
> To: elecraft at mailman.qth.net
> 
> Subject: Re: [Elecraft] Trouble configuring a K3, MicroHAM Microkeyer
> 
>          2 and N1MM+
> 
> Message-ID: <dbf15f14-f0c6-3c62-03d4-841b20f13aa3 at subich.com>
> 
> Content-Type: text/plain; charset=utf-8; format=flowed
> 
>   
> 
>   
> 
>> At the moment, CW works as expected, EXCEPT when I use the
> 
>> footswitch.  When use it, the PTT1 light stays lit and the radio
> 
>> goes into transmit won't get out of it -- you have to turn off the
> 
>> rig. The PTT! light stays on after the rig's shut off. You have to
> 
>> turn the MK2 on and off for the PTT1 LED to turn off.
> 
>   
> 
> Was the MK II previously used with an Icom transceiver?  Is the I
> 
> "ICVOX" jumper installed?   See: "Preparing MK II for use" in the
> 
> MK II Users Manual.
> 
>   
> 
> 73,
> 
>   
> 
>       ... Joe, W4TV
> 
>   
> 
>   
> 
>