[Elecraft] K3 digi

[Don Wilhelm]

All,

The Line In level is adjusted with the MIC Gain, and he apparently has 
that working.
Line Out level is a CONFIG menu entry - adjustable from 0 to 30, but 
recommendation is that it not be set higher than 10.

My opinion from the short description is that it is a driver conflict or 
other issue - the output device does not show up in his software.

73,
Don W3FPR

On 1/21/2018 2:22 PM, Bill And Jane Ferry wrote:
> Is your "Line Out" turned On? Go to confg  and check.  Then when you adj. Mike gain it will say Line Out.