[Elecraft] K3 digi

[Joe Subich, W4TV]

> In audio settings, the audio coded device
> shows up on input but does not on output.
The audio CODEC is supported by the native Windows USB Audio Class
driver.  It is independent of the FTDI USB to Serial converter (UART).

If an audio input or output is not visible in the Windows Sound Control
panel, I suggest right clicking on the Recording or Playback window and
checking "Show Disconnected Devices" and "Show Disabled Devices".  Once
you can see the devices, the solution should be obvious.

73,

    ... Joe, W4TV


On 1/21/2018 1:53 PM, John wrote:
> I've had my K3 upgraded with the new syn boards at Elecraft
> 
> and just tried to run digi.  In audio settings, the audio coded device
> 
> shows up on input but does not on output.
> 
> Any ideas.
> 
> My rig has been to Elecraft twice for other problems that have
> 
> not been resolved.
> 
> Thanks for any ideas.
> 
> 73.
> 
> John.
> 
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com