[Elecraft] K3S and N1MM+ Logger question

[Ian Kahn]

Chuck,

Record your audio files as .WAV files. There is extensive documentation on
the N1MM Logger+ Web site, in the documentation section, on where to place
the audio files in the N1MM Logger+ directories, how to edit the
configuration file for its voice keyer function, and how to configure the
logger and the K3S so they all work properly. I had my K3 set up per these
instructions for a couple of years,and it worked very well. Then, last
year, I finally got the K3DVR board.

Good luck!

73 de,

Ian, KM4IK

On Jan 13, 2018 3:36 PM, "Chuck Chandler" <chandlerusm at gmail.com> wrote:

> I am getting my K3S set up for contesting.  So far I have N1MM+ sending CW
> through the USB control.
>
> My question is for setting up voice contesting.  I do not have the K3
> digital voice option yet but I can see that N1MM+ does interface with the
> K3S audio codecs.
>
> Is there a way to use the N1MM+ software to send audio files over the air,
> or to use the K3S to record audio files to be saved and sent later?
>
> 73 de Chuck, WS1L
>
> --
>
>
> ===================
> Chuck Chandler
> chandlerusm at gmail.com
> ===================
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to km4ik.ian at gmail.com
>