[Elecraft] Elecraft KIO3B and WSJT-X

[Jim Brown]

Dave,

It is usually the POWER SUPPLY that causes RFI,  NOT the monitor. To 
verify, leave everything connected but unplug the POWEr SUPPLY from 120VAC

73, Jim K9YC


On 1/10/2018 12:04 PM, Dave S wrote:
> I don't think my noise problem with WSJT X is caused by the monitor 
> because it is still there with the monitor off.
> It just almost has to be something about the Elecraft outboard 144 MHz 
> transverter because I don't have this problem with my TS2000 on 2m.
> The mystery is why don't I have the same problem with WSJT 10?
>
>
> On Wednesday, January 10, 2018 12:06 PM, Jim Brown 
> <jim at audiosystemsgroup.com> wrote:
>
>
> As recently as a year ago, I was still seeing Samsung 24-in monitors
> running from nominal 14VDC supplies. I already own several, and bought
> another to have as a spare. They're 1920 x 1080.
>
> 73, Jim K9YC
>
> On 1/9/2018 11:29 PM, Josh Fiden wrote:
> > It's a good idea, but too severely limiting since almost all monitors
> > now run on 19V. Thus far the HP 23es is fine. I ran RTTY with it next
> > to KPA500 on several bands with no issues. Final test will be pointing
> > the 6m EME array at the shack and listening. The monitors look really
> > good and were on sale at Best Buy for $119!
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ionamerica at yahoo.com <mailto:ionamerica at yahoo.com>
>
>