[Elecraft] Elecraft KIO3B and WSJT-X

[Josh Fiden]

It's a good idea, but too severely limiting since almost all monitors 
now run on 19V. Thus far the HP 23es is fine. I ran RTTY with it next to 
KPA500 on several bands with no issues. Final test will be pointing the 
6m EME array at the shack and listening. The monitors look really good 
and were on sale at Best Buy for $119!

73,
Josh W6XU

On 1/7/2018 3:04 PM, Don Wilhelm wrote:
> Josh,
>
> See if you can find a monitor with an external power supply that 
> produces 12 volts.
> If you can accomplish that, connect the monitor to the shack 12 volt 
> power system instead of using the switching 'wall-wart' that comes 
> with the monitor.
>
> 73,
> Don W3FPR
>
> On 1/6/2018 5:16 PM, Josh wrote:
>> That's a good clue, Bert!
>>
>> So turning off the monitor should kill the noise. Easy to test.
>>
>> Funny you mention it. I'm going to test a prospective new monitor 
>> today. I'm trying a smaller one so I can fit 2 on the operating desk. 
>> I find lots of them are unusable, either the monitor or it's PS 
>> generates noise, or they are susceptible to RF.
>>
>