[Elecraft] KPA500 remote program - Power control

[Dick Dievendorff]

Ahh, that’s it!  

Dick




Sent from my iPhone

> On Jan 9, 2018, at 09:33, Paul Baldock <paul at paulbaldock.com> wrote:
> 
> I changed the Baud rate from 9600 to 38400 and now the POWER button works to turn the amp on and off.
> 
> - Paul
> 
> 
> 
> 
> I am running KPA500 remote program. I am connected via RS232.
> 
> If the KPA500 is ON (at the back and at the front) then I can HOST and CONNECT to the KPA500 and control all functions. When I press the POWER button on the KPA500 remote program the KPA500 correctly turns off. However, when I press the remote POWER button again the KPA500 does not turn back on. It seems that the KPA500 RS232 port is not active when the KP500 is not ON.  Is this correct? If so how do I turn the power on remotely from the PC?
> 
> Thanks
> 
> - Paul
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com