[Elecraft] K-Pod and/or K3 programmig?

[Bill Johnson]

Chapter 5 of Fred Cady's Macro Programming, has some of these plus methods of macro testing.  I used some of the content to program mine.There's plenty of references, e.g., setting a frequency is on pages 115-116, etc.

73,
Bill
K9YEQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Monday, January 8, 2018 6:33 AM
To: Eric Rosenberg <ericrosenberg.dc at gmail.com>; elecraft at mailman qth. net <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K-Pod and/or K3 programmig?

Eric,

Some of those functions are already present in the K3/K3S - read the
*entire* manual including the chart of menu functions to see more things that you can do.

- jump up/down x kHz, see VFO OFS
- increase/decrease step of tuning encoder, see VFO CRS
- switch to a different band, see "Quick Memories" - I have not used the 
BAND+ BAND- switches in a long time, band switching is a quick two
button tap.

73,
Don W3FPR

On 1/8/2018 5:59 AM, Eric Rosenberg wrote:
> I'm interest in macros or ?? (alternative key assignments) to enable simple tasks I've been accustomed to with other radios.
> 
> The ones that immediately come to mind are
> - jump up or down X Khz (2 buttons)
> - increase/decrease (or reset to the default) step of the tuning encoder
> - switch directly to a specific band instead of having to scroll through them to get where you want to go (6 buttons).
> 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k9yeq at live.com