[Elecraft] Macros

[Dave Cole (NK7Z)]

Eric,

If you look at:

http://nk7z.net/adding-external-keypad-k3/

You will find a short article on adding a 64 key pad to the K3 for macro 
selection.  It assumes you have a P3 as well.

About 1/2 way down the post is a down-loadable spread sheet of macros, 
they don't give you exactly what you wanted, but they may help in 
getting you started in writing macros...

Fred's book is a really useful item to have, as well as Elecraft's P3 
Macro programming manual.

73s and thanks,
Dave
NK7Z
http://www.nk7z.net

>      
>      Eric W3DQ wrote:
>      
>      I'm interest in macros or ?? (alternative key assignments) to enable
>      simple tasks I've been accustomed to with other radios.
>      
>      The ones that immediately come to mind are
>      - jump up or down X Khz (2 buttons)
>      - increase/decrease (or reset to the default) step of the tuning encoder
>      - switch directly to a specific band instead of having to scroll through
>      them to get where you want to go (6 buttons).
>      
>      There are others that I'm sure I'll think of as time moves on.
>      
>      Thanks & 73,
>      Eric W3DQ
>      - Sent from my mobile phone
>      
>      
>   
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
>