[Elecraft] Strange thing.

[Bob McGraw K4TAX]

Have you been operating the K3S using CAT control from an application or 
logging program?   I've found when terminating some programs or the 
computer or radio, during the shut down sequence, things change.     
Otherwise, values are not as you normally use them or as you left them 
the previous night.

I always first close the application, turn off the radio, turn off the 
power supply, and shut down the computer.  My start up procedure is just 
the  opposite.  Computer on, power supply on, radio on, open the 
application.

73

Bob, K4TAX


On 1/7/2018 1:29 PM, Mal Speer wrote:
> I strange thing happened to my K3s this morning. Both the mic gain and
> compression were set to 0. After trying to get into a net, and not being
> heard, I discovered the problem. I did not touch any settings from the last
> time I used the rig, which was yesterday afternoon.
>
> Has anyone had this problem?
>
> Mal WA2TWA
>
>   
>
>   
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>