[Elecraft] K-POD LED 4

[Tony G6GLP]

Hi John,
I would check the s/w versions of each of the rigs and kpods to make 
sure they are all the same.
try exchanging one kpod with the other and see if the led on stays with 
the rig or the kpod.

My guess is the sw in one of the devices is lower than the other device.

73 de Tony G6GLP

On 03/01/2018 12:23, john at kk9a.com wrote:
> I purchased another K-POD and on New Years day I connected it to my second
> K3S. I programmed it identically to my first one. Both appear to work the
> same except the new one has the LED 4 on and on the original the LED is
> off. None of my programs were written to control LED 4. To make them the
> same, in the Elecraft utility, I tried KPLED4ON; and KPLED4OFF; with each
> unit and it had no effect so I still have one K-POD with the LED 4 on and
> one with LED 4 off. I tried typing this command in the test area and also
> I created a temporary macro button and neither had any effect. How can I
> turn this light on or off?
>
> John KK9A
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to g6glp at strus.co.uk



---
This email has been checked for viruses by AVG.
http://www.avg.com