[Elecraft] K3s Low sub receiver volume

[Bill Johnson]

I use the sub on diversity and dual monitoring.  I have my front panel knobs set to adjust levels between the two receivers.  If using diversity, then B Set is required to set the correct antenna as the wrong antenna can create low volume.  You might want to review your settings and possibly go back to originals if you have saved them when you first backed up. You can always come back to current.  I save regularly regardless, as I do mess up settings when going through the menus.  Perhaps an aging issue.  :-)

73,
Bill
K9YEQ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Thomas Doligalski
Sent: Tuesday, February 27, 2018 6:47 PM
To: Scott <netbsd21 at gmail.com>
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3s Low sub receiver volume

They are the same. 

Tom, W4KX

Sent from my iPad

> On Feb 27, 2018, at 7:40 PM, Scott <netbsd21 at gmail.com> wrote:
> 
> Check NR and ATT are the same on both main and subrx.
> 
> Scott
> AD5HS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to w4kx at mac.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com