[Elecraft] Remote operation with a K3/0 and PTT

[Gerry Hull]

Hey Serge,

Long time no talk.

Check the I/O settings on the Remote RRC web page.
You have to assign one of them correctly for the 1/8" PTT
to work correctly.

73, Gerry W1VE / VE1RM

Gerry Hull, W1VE  Hancock, NH USA
Member: ARRL, YCCC, YCCCN, CW Ops
gerry at w1ve.com ph: 1-617-CW-SPARK (find me)




On Tue, Feb 27, 2018 at 11:18 AM, Serge_VA3SB <smbertuzzo at bell.net> wrote:

> Hello to the group.
>
> I have a remote setup using Remote rig boxes along with a K3s, KAT500 and
> KPA500.
> All seems to be playing well.
> I have a question regarding the use of a foot switch with the K3/0. I am
> not
> able to figure out how to use a foot switch for SSB operation rather than
> VOX. I am using a Heil Pro Set headset. I would prefer to use the foot
> switch if at all possible.
> Any help would be greatly appreciated.
> Thank you
>
> Serge
> VA3SB
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gerry at w1ve.com
>