[Elecraft] KX2 echo in the speaker

[Irma & Linas(LY2H)]

Touching is like you take the radio in to your hands, put it upside down on
the table, removing the back pannel, or just like pushing buttons on the
radio, or like taking  a pen and slightly bumping on the chassis. I have
tried to turn the mic's gain down to 0, but it didn't help.
Linas LY2H

On 2018 vas. 26, pr at 02:09 John Hiatt <hidron at hotmail.com> wrote:

>
> How hard are you touching it?  I am wondering if it could be the internal
> microphone picking it up.
>
>
> John, KC7DRI
>
> ------------------------------
> *From:* elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net>
> on behalf of Irma & Linas(LY2H) <irmalinas73 at gmail.com>
> *Sent:* Sunday, February 25, 2018 1:03 PM
> *To:* elecraft at mailman.qth.net
> *Subject:* [Elecraft] KX2 echo in the speaker
>
> Hello group,
>
> I have a bizzair effect in my KX2. When I touch the chassis of the radio
>  each  touch corresponds with the echo in the speaker. The radio is not
> connected to the antenna, could run on the battery or the PS, the effect is
> there. Touching also makes the Smeter bar move a bit.
> Does anybody has/had the same issue and know the solution?
>
> Thanks , Linas LY2H
>