[Elecraft] KPA1500

[Alan]

Or go to Walmart and buy a $30 hand truck.

Alan N1AL


On 02/25/2018 07:44 AM, Don Wilhelm wrote:
> No special arrangements should be necessary.
> When the large box is delivered, he can open it (without any need to 
> lift it), and remove the two boxes one at a time.
> 
> If he cannot easily remove the two boxes from the larger one because it 
> is a tight fit, it is easy to bend one flap down and roll the box over 
> that flap and over again so the box is sitting on its open end.  Then it 
> is easy to lift the outer box off with no struggle.
> The way the gear is packaged, it will survive that "rolling over" with 
> no harm at all.
> 
> I do that regularly at trade shows for the K3, and more recently the 
> KPA1500 because it is difficult to lift the units vertically out of the 
> box due to the tight fit and the resistance of the foam shipping 
> material to the sides of the box.  Much easier to roll it over and lift 
> off the box.
> 
> 73,
> Don W3FPR
> 
> On 2/25/2018 3:53 AM, G4GNX wrote:
> 
>>
>> What Bill wants is two SEPARATE boxes to be shipped to him, without an 
>> outer wrapper to combine them. He wants to be able to carry EACH box 
>> separately from his door to his shack, so that he doesn't strain his 
>> back.
>>
>> Perhaps special arrangements can be made for Bill? My other suggestion 
>> would be to have the package delivered to the front door, then remove 
>> each box individually and carry them separately indoors.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1al at sonic.net