[Elecraft] KPA500 Faulting on high SWR on power rise
Bill Johnson
k9yeq at live.com
Sat Feb 24 14:07:27 EST 2018
1000v to me could be too low for a 500W amp. You can for the time being leave the plug out, just disconnect when you are not using your equipment. I use a remote disconnect to remove the antennas at my remote grounding panel.
73,
Bill
K9YEQ
-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Chris Hallinan
Sent: Saturday, February 24, 2018 10:51 AM
To: donwilh at embarqmail.com
Cc: Wes Stewart <wes_n7ws at triconet.org>; <elecraft at mailman.qth.net> <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] KPA500 Faulting on high SWR on power rise
Not sure. I pulled the plug out and Googled the numbers on it. The plug is labeled CG2 1000, which I think means it is a 1000V breakdown voltage.
It appears to be a Littlefuse device, according to Allied Electronics which has the leaded version of the part for $2 ;)
Without knowing for sure, 1000V seems plenty for a 500W amp into approximately 50 ohms load. Note I have the surge protector on the low SWR side of the tuner which is mounted under an eve of the house. Probably not ideal but that's another issue ;)
Chris
On Sat, Feb 24, 2018 at 11:06 AM, Don Wilhelm <donwilh at embarqmail.com>
wrote:
> Chris,
>
> What is the possibility that you have an HP suppressor body and a 200
> watt Arc-Plug?
>
> 73,
> Don W3FPR
>
>
> On 2/24/2018 10:32 AM, Chris Hallinan wrote:
>
>> Hi Wes. Appreciate the feedback. I'm certainly not impressed by
>> having one marked HP that is clearly not. See my earlier post: the
>> surge protector was my problem all along. It's arcing at about 300W.
>>
>>
--
Life is like Linux - it never stands still.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9yeq at live.com
More information about the Elecraft
mailing list