[Elecraft] K3 And WSJT-X FT8 Timing

[Bob McGraw K4TAX]

But there is a delay in WSJT-X.   See the F2 Setup,  Advanced tab and 
Miscellaneous.   Make sure the TX Delay is set to 0.1 sec. This is the 
time delay between PTT and start of audio.  Also, if one uses CAT 
control, then be sure the VOX on the radio is OFF. Don't use both.

73

Bob, K4TAX


On 2/23/2018 8:19 AM, Ted Bryant wrote:
> Hardly.  There is no delay adjustment for VOX activation, just sensitivity.
> if the VOX sensitivity is set correctly, activation is virtually
> instantaneous.  It is the VOX release where the delay is adjustable.
>
> 73, Ted W4NZ
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave Cole (NK7Z)
> Sent: Friday, February 23, 2018 8:55 AM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 And WSJT-X FT8 Timing
>
> Yes!  I never use VOX for that reason.
>
> 73s and thanks,
> Dave
> NK7Z
> https://www.nk7z.net
>
> On 02/23/2018 05:48 AM, John Harper wrote:
>> He's using VOX. Does that not introduce an additional delay over what
>> PTT would have?
>>
>> John AE5X
>> https://ae5x.blogspot.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html Message delivered to
>> dave at nk7z.net
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to w4nz at comcast.net
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>