[Elecraft] K3 And WSJT-X FT8 Timing

[Nr4c]

Check the clocks on the computers. Sync them to a time server. 

Sent from my iPhone
...nr4c. bill


> On Feb 22, 2018, at 6:30 PM, James Bennett <w6jhb at me.com> wrote:
> 
> Hi Dennis - how you doing?
> 
> Sorry I neglected to provide enough info - was in a hurry to post that before I had to run out to pickup kids at school (close to your dads QTH!)
> 
> I am using VOX on both rigs. Each rig has it’s own computer and separate, but identical external USB sound cards. The K3 is connected to an iMac and the KX3 is connected to a Raspberry Pi 3.
> 
> Jim / W6JHB
> 
> 
> 
>> On Feb 22, 2018, at 2:31 PM, Dennis Moore <dennis at mail4life.net> wrote:
>> 
>> How are you keying the K3, VOX or PTT?
>> 
>> It's not clear from the email, are the K3 and KX3  on separate computers on just different sound cards in the same computer?
>> 
>> 73, Dennis NJ6G
>> 
>> 
>>> On 2/22/2018 14:22, James Bennett wrote:
>>> Got a question about using my K3 with WSJT-X 1.8.0 with FT8
>>> 
>>> I started looking at the “time bar” in WSJT-X and when the K3’s red TX light comes on with the meter showing RF going out. It is between 1.5 and 2 seconds after the beginning of the new 15 second sequence! In that short duration, I am hearing other stations’ signals coming through on my headphones, so I know that other folks are getting their rig to transmit right at the start of the 15 second sequence. If mine is coming on 1.5 - 2 seconds late, I’m thinking I may not always get decoded on the other end.
>>> 
>>> So, I switched over to my KX3 running the same version of WSJT-X and observed what happened there. No delay - when the new 15 second sequence starts, the KX3 goes into transmit almost immediately.
>>> 
>>> Both the KX3 and the K3 are connected to two identical Tascam USB125M external sound cards.
>>> 
>>> Is there some setting on the K3 that is causing my transmissions to fire off a tad late?
>>> 
>>> Jim / W6JHB
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w6jhb at me.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mai