[Elecraft] POWER LOCKED

[Don Wilhelm]

Bob,

That must have been set on by the prior owner.
Had you done an EEINIT, it would have wiped those menu items back to 
factory defaults.

You might want to go through the menus (both user and CONFIG) to see if 
the other menu setting match your operating preferences.
That is a part of "getting to know your K3" - especially important when 
buying a used one.  You never know why the prior owner had selected 
particular menu items.

73,
Don W3FPR

On 2/21/2018 8:32 PM, Bob Gibson via Elecraft wrote:
> WOW THAT WORKED TU TU...Thanks Carl..very much...it worked!!!!
>      73s Bob W5RG
> 
> 
>        From: Carl Clawson <clawsoncw at gmail.com>
>   To: "Elecraft at mailman.qth.net" <Elecraft at mailman.qth.net>
>   Sent: Wednesday, February 21, 2018 6:37 PM
>   Subject: Re: [Elecraft] POWER LOCKED
>     
> Another thing to try:
> 
> Press and hold the Menu button for a second to enter the Config menu.
> 
> Rotate the VFO B knob until you see the PWR SET entry. Tap '1' and see if
> it unlocks your power control.
> 
> This is a feature that was introduced to keep other ops from messing with
> transmit settings. It locks power, compression, and mic gain.