[Elecraft] K3 with N1MM - SPLIT mode

[N2TK, Tony]

Hi Ted,
All of the stations that I clicked on the bandmap were operating
transceiver. After a while I was paying more attention to the issue. I think
I only worked one station that was split.
I had never seen this happen before. For ARRL SSB will swap K3's to see if
the problem is still there.

Yes, I had tried the example below and I go the same result.

73,
N2TK, Tony

-----Original Message-----
From: Ted Bryant [mailto:w4nz at comcast.net] 
Sent: Tuesday, February 20, 2018 3:54 PM
To: 'N2TK, Tony' <tony.kaz at verizon.net>; 'Elecraft Reflector'
<Elecraft at mailman.qth.net>
Subject: RE: [Elecraft] K3 with N1MM - SPLIT mode

Tony,

It sounds like the software is operating correctly.

On the spots that you clicked on and the K3 went into Split mode, were the
spotted stations actually operating split?  

This can also happen if the spotting station is in split mode when the spot
is sent to packet.  You can prove this to yourself.  Type a call into the
call sign field of the Entry window.  Put the K3 in split mode with the sub
vfo a kHz or two away. Now just tune the main vfo away and watch the
self-spot go into the bandmap.   Take the K3 out of split mode.  Use Ctrl+Up
or Dn  arrow and jump back to that spot.  The K3 will go back into Split
mode with the same offset as when you spotted it.

Similarly, if the radio is in the split mode and you click on a non-split
spot, it will cancel the split on the radio.

HTH.

73, Ted W4NZ


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of N2TK, Tony
Sent: Tuesday, February 20, 2018 1:20 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] K3 with N1MM - SPLIT mode

Had a weird problem that I had not seen before this past weekend Was using
the K3 with N1MM+. About a quarter of the time when I clicked on a callout
in the N1MM+ Bandmap the K3 would go into SPLIT mode. Anyone else see
something like this?

Not sure if this is a unique condition I am seeing. The N1MM+ folks say they
have not heard of such an issue.

 

Tnx for any feedback

N2TK, Tony

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w4nz at comcast.net