[Elecraft] Strange CW at each button push

[Richard Day]

Thanks guys.  That is very fast response.

I have as a result of these suggestions, updated to the newest revision of
the firmware.
I had thought that the radio was giving me information through the tones,
but I couldn't find it.

I turned off the SW TONE, and that will probably do it.  I will see on my
next activation of a summit.

Thank you each of you for the help.

Rich Day
KK4DZE

On Mon, Feb 19, 2018 at 5:24 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:

> Richard,
>
> Check the SW TONE menu  If you have it set to CODE nn (where nn is WPM),
> then you will get that morse when you push a button - it is a nice feature
> for sight impaired amatuers.
>
> That can also be turned on by Holding the AFP/AN button while turning the
> KX2 on.
>
> 73,
> Don W3FPR
>
>
> On 2/19/2018 1:53 PM, Richard Day wrote:
>
>> On my last two SOTA activations, my KX2 appears to be working valiantly.
>> At some point, however, I find that I cannot push any button without it
>> giving me a short CW message.
>>
>>


-- 
Richard N. Day
828-606-6922 <(828)%20606-6922> Cell