[Elecraft] FT8

[Michael Eberle]

I am assuming you are running WSJT-X.

I don't think you can use the same COM port for the CAT Control and PTT 
Method.  If you don't want to use a separate COM port for PTT then you 
should be able to get it to work by selecting CAT instead of DTR.

Mike - KI0HA


On 2/18/2018 16:00, James Bobo wrote:
> Just trying to get on FT8 with K3. Receive fine but unable to 
> transmit. Settings are as follows:
>
> Com1, 38400,DB 8,2,No handshake,DTR Com1, Data/Pkt
>
> What am I doing wrong? Any help would be appreciated.
>
> 73, Jim, W5ODD
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mteberle at mchsi.com
>