[Elecraft] FT8
Don Wilhelm
donwilh at embarqmail.com
Sun Feb 18 19:07:58 EST 2018
Jim,
Are you setting your audio correctly to produce 4 bars with the 5th bar
flickering on the ALC meter? If not, you will not transmit properly.
See the article on my website www.w3fpr.com. Scroll down in the left
column to the last article and click the link.
Ignore the recommendations on the internet and many data mode
applications to set the power to max and adjust the power with the audio
level - it just does not work that way with Elecraft transceivers.
73,
Don W3FPR
On 2/18/2018 5:00 PM, James Bobo wrote:
> Just trying to get on FT8 with K3. Receive fine but unable to transmit.
> Settings are as follows:
>
> Com1, 38400,DB 8,2,No handshake,DTR Com1, Data/Pkt
>
> What am I doing wrong? Any help would be appreciated.
More information about the Elecraft
mailing list