[Elecraft] KPA1500 duty cycle

[Nr4c]

And you can affect duty cycle by adjusting the cw repetition rate. If it gets too hot increase the delay. 

Sent from my iPhone
...nr4c. bill


> On Feb 15, 2018, at 7:39 AM, "john at kk9a.com" <john at kk9a.com> wrote:
> 
> RTTY contesting has a much higher duty cycle, especially when using a
> single radio and no one is answering your CQs.
> 
> John KK9A
> 
> 
> On Feb 15 03:51:39 G4DYA wrote:
> 
> The FT8 parameters were tweaked slightly during the beta phase prior to
> the release of WSJT-X 1.8.0, and the TX time was reduced to 12.64 sec,
> so the duty cycle is now about 42%.
> 
> 73,
> Richard G4DYA
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com