[Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500

[N2TK, Tony]

What about if you have the earlier Y-Box and have a KPA500 on it already?
How do you add the KPA1500?
Tnx
N2TK, Tony

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bob Wilson, N6TV
Sent: Monday, February 12, 2018 2:50 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500

On Mon, Feb 12, 2018 at 11:41 AM, john at kk9a.com <john at kk9a.com> wrote:

> Don't use VGA products.  Elecraft sells a Y adapter that will work 
> perfectly and N6TV sells a Y-Box to connect up to four devices to the ACC.
>
> John KK9A
>

Correct, plus with the new version 2.1 Y-BOX, you don't have to purchase a
KPAK3AUX cable to connect the KPA1500.  A $10 MF 15-pin cable (not a VGA
cable) will work fine because the internal wiring of the Y-BOX v2.1 matches
the Elecraft custom cable wiring wiring.  It also adds a feature so you can
power up the KPA1500 remotely with a K3 macro (something not supported by
Y-adapters with an unmodified KPAK3AUX cable).

See https://bit.ly/Y-BOX

73,
Bob, N6TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to tony.kaz at verizon.net