[Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500

[Don Butler]

Tnx John …. I guess a better option might be to just buy a VGA Y-Adapter rather than make one up and have to do all that soldering …

Don, N5LZ

Sent from Mail for Windows 10

From: john at kk9a.com
Sent: Monday, February 12, 2018 12:16 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Y-Adapter for K3S ACC - KPAK3AUX - KPA-1500

Yes a Y will work.  I have had a MicroHAM keyer, a Top Ten Band Decoder
and a KPA500 all connected to the same ACC jack.

John KK9A


Don Butler n5lz at comcast.net
Mon Feb 12 12:31:13 EST 2018

I've been studying the manual while waiting for my new KPA-1500 to ship ...
I see that the KPAK3AUX cable must run from AUX on the amp to ACC on the
K3S.   In my case I already have a microHAM MK2R+ cable connected to the K3S
ACC  (providing band data for switching bandpass filters).
I'm thinking that I can build a Y-Adapter cable assembly with DB-15s  to run
from the K3S ACC and split (1) to KPAK3AUX and on to the KPA-1500 AUX . and
(2) to the MK2R+ ACC cable.

Will that work?

Will conflicts with KPA-1500 or MK2R+ be created?

Thanks,

Don, N5LZ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n5lz at comcast.net