[Elecraft] Sub RX Deaf??

[ROCCON GRAZIANO GIULIANO]

Hello Chris,


i just installed the second RX me too.

Same impression during first but the solution was very easy for me, i 
had the Config:spkr set to 2 instead of 1 and simply i had not audio 
from the second rx.

Changing Config:spkr value from 2 to 1, make the second rx "screams" 
correctly :-)

Ah, and look also in the menù config for KRX3 if is activated and you 
choose ANT=ATU if you have not installed the dedicate BNC or ANT=BNC if 
you have installed the dedicate BNC, remember to connect and antenna to 
the BNC in this case.

73's de IW2NOY.



Il 12/02/2018 01:49, GWK ha scritto:
> Chris,
> When I built my K3 years ago, the Sub-Rx didn't work.  I found I had 
> plugged the synthesizer module (KSYN3 at that time) into its socket 
> just one pin off - very hard to see.  Corrected it and never looked 
> back. Fortunately, no damage to the synthesizer in doing this.
> So maybe?
> George, W3HBM
>
> On 2/11/2018 3:43 PM, Chris Soames wrote:
>> Hi Just fitted SubRx into my K3 nothing heard only background noise, 
>> no matter what ant configuration or other setting,
>> SubRx appears to be deaf?
>>
>> Oh dear where to next?
>>
>> Chris G0TZZ
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to gkidder at ilstu.edu
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to graziano at roccon.com
>