[Elecraft] K3s Low sub receiver volume

[Scott]

You may want to check that NR is the same (on or off) for both 
receivers.  In my experience you may have NR off for the main and NR on 
for the sub.  That will give you a "lower volume" for the sub.  Also, 
check the attenuater is the same for both receivers too.

Scott
AD5HS

On 2/7/2018 9:32 PM, Lawrence obrowski wrote:
> There have been a few posts on this subject, but none had answers.
> 
>   
> 
> Both my main and sub receiver are on the same antenna.
> 
> The audio volume from the sub is much lower.
> 
> The AF for the main is…… let’s say at 9 o’clock….. to get equal volume level from the sum… Sub AF has to be at 3-4 o’clock.
> 
> RF on both are the same.
> 
> Any suggestions? Is this normal?
> 
>   
> 
> Larry W0LRF
> 
>   
> 
>   
> 
> Lawrence Obrowski, C.P.E.A.
> 
> Redstone Engineered Home Systems, Inc.
> 
> 303 588 7233
> 
> www.redstonehomekits.com
> 
>   
> 
> This communication (including any attachments) may contain privileged or confidential information intended for a specific individual and purpose, and is protected by law.  If you are not the intended recipient, you should delete this communication and/or shred the materials and any attachments and are hereby notified that any disclosure, copying, or distribution of this communication, or the taking of any action based on it, is strictly prohibited.
> 
>   
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to netbsd21 at gmail.com
>