[Elecraft] QUICK QUESTION

[Bill Frantz]

look for the SMA connector next to the BNC antenna connector. 
That will tell you if the KX3 has a 4M or 2M module. Opening it 
up is quite easy, as it is the way you change the internal 
batteries, so that works too. If the installer checked the 2M or 
4M box on the transverter, you get a clue as to which band was installed.

73 Bill AE6JV

On 2/6/18 at 12:58 PM, wmgoins at gmail.com (Michael Goins) wrote:

>Is their an easy way to tell if a KX3 has the 2 meter module in it without
>opening it up?
>
>Mike, k6wmg

-----------------------------------------------------------------------
Bill Frantz        | When an old person dies, a   | Periwinkle
(408)356-8506      | library burns. - Joe McGawon | 16345 
Englewood Ave
www.pwpconsult.com | Irish Ethnographer           | Los Gatos, 
CA 95032