[Elecraft] Menu item

[ROCCON GRAZIANO GIULIANO]

Hello,


very strange !

The firmware is able to identify if is a K3 or K3s (serial number is 
different, the k3s always begin with 10xxx) and if is a K3. the menu it 
should not appear, i guess.

Best 73 de iw2noy - w2noy


Il 02/02/2018 08:41, Ken K6MR ha scritto:
> The Main:Atten setting is for the new 5/10/15 dB attenuator in the K3s 
> main receiver.  Unless you got the new RF board I don't think you have 
> it.  So the Atten setting is fixed at 10 dB.  The firmware probably 
> identifies the old RF board and is trying to tell you that the setting 
> is N/A for your radio.
>
> Ken K6MR
>
>
>
>
> On 01-Feb-18 20:36:25, "Andy Faber via Elecraft" 
> <elecraft at mailman.qth.net> wrote:
>
> My K3 came back from being upgraded and seems to have a new menu item, 
> called ATTEN, with "10db" displayed. When I turn the big knob, it 
> stays at that value and the secondary display says "N/A".  It's not in 
> my instruction book, nor is it in the online manual I found on the 
> Elecraft website.  Am I missing something obvious, or can someone 
> explain?
> 73, andy ae6y
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6mr at gmx.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to graziano at roccon.com
>