[Elecraft] K3s SSB transmitting bandwidth?

[Michael Blake]

Thanks Bob.

Very 73 - Mike - K9JRI






> On Dec 25, 2018, at 4:21 PM, Bob McGraw K4TAX <rmcgraw at blomand.net> wrote:
> 
> Just made a quick sweep of my K3S in DATA A mode, no EQ, No SP, and find that it will pass 70 Hz with little to no attenuation. On the high end it will pass 3000 Hz but greatly attenuates 3100 Hz.  This is done with the stock filter of 2.7 kHz.
> 
> At this point in time, I don't have a suitable attenuator and cable to make measurements from the MIC input.
> 
> 73
> 
> Bob, K4TAX
> 
> 
> On 12/25/2018 10:03 AM, Michael Blake via Elecraft wrote:
>> When using the stock K3s 2.7 KHz. roofing filter and all TX EQ settings are zero (0) what is the normal TX audio rolloff below 300Hz.?
>> 
>> Michael Blake
>> k9jri at mac.com <mailto:k9jri at icloud.com>
>> 
>> 
>> 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcgraw at blomand.net
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9jri at mac.com